Drag Racing Results - New best E.T. and MPH with TEA1.5s, X1, in an A4.

Old best was 11.11@120.35 with a 1.50 in negative 1000 DA at HRP. Recently I added 90/90, tuned it to 427 rwhp and it wasnt running like I thought it should. I had Hooker LTs and ORY with a single bullet and dump at the axle. Went ahead ran open headers with 12" extensions today at a local track that is known for shitty prep and ran 11.05@123.05 with a shitty 1.59 60' in a DA of 350'. Race weight still above 3400#s. If I can get her to HRP with decent air Im in the 10 second club for sure.

Congrats on the new times. Mph is there ya just need to get that 60ft and you are in there.

wow! that is some serious mph for an auto, gotta love those heads. congrats.

Definitely stout MPH considering an A4 trans. buddy :devil:

Congrats & hopefully 10's next time .

peace

Thanks everyone. Opening up the exhaust really helped the car. I couldnt believe it when I seen 123 mph on the slip, specially in that air. I did it 3 times also. I think it awesome considering the set up I run. Ive been wanting to change the cam but Im gonna stick with this setup and see how far it can go.

:cheers: Dam .........11.OO..........10sec time slip is in the bag at HRP!

Blue where ya been? Not to shabby for a 96,000 mile shortblock, most of them not so nice.

Blue where ya been? Not to shabby for a 96,000 mile shortblock, most of them not so nice.

Not to shabby at all........ Congrats on the new and improved times!

Maybe you and I, and Mr. Joey H, can roll out to HRP together and get our 10sec time slips! :devil:

Im down for that but Joey's got to get off his ass and start working on that car.

JaSSon,

OLD-BLU might be tuned and ready too roll by the weekend!

Congrats, that's an easy 10 second time with a better launch!

Keep at it!

Derek

nice :)

-1000 ft DA??? I am moving to Texas...

Congrats on the time man :)

Congrats!
Awesome MPH
What does you Y look like?
What size pipes?
What kind of merge?

Congrats!
Awesome MPH
What does you Y look like?
What size pipes?
What kind of merge?
I had a Hooker ORY with a 3" bullet and a turndown at the axle. I took this off and ran open headers with a 12" extension and ran the new best in sig.

Nice run, that is hauling!

What wheel & tire set up are you running?

26x10x15 e.t. drags on a 8"rim with rim screws. Skinnies up front.

yup, just a good 60ft away :D

Congrats!