Syxx613

iTrader: (8)

thanks guys!

Sgt. Spuds

iTrader: (1)

I think the thid picture is were the CAGS thing plugs in at, but im not sure, it might be on the other side.

oange ss

iTrader: (50)

1. plug where the skip shift solenoid should be
2. not sure
3. back up light switch

oange ss

iTrader: (50)

i think 2. is where the shifter detent assy should be...hard to tell from the pic

Syxx613

iTrader: (8)

2 had a plug in it. i took the plug out and it had a little ball bearing on the end of it. and im not sure what a shifter detent assembly is. that whole in 2 is on the opposite end of where the skip shift solenoid is supposed to be. thanks!

oange ss

iTrader: (50)

the ball is the shifter rod detent assy

calhoon

iTrader: (6)

Answers above are correct. The aluminum plug is taking the place of the skip shift solenoid. The oposite hole is for the rail detent capsule. Although it looks like a plug , the ball is actually spring -loaded and acts on the rail offset lever to provide load fore/aft.The plugged part is a back up lamp switch.