11.669@116.31 with manifolds....SI
#1
11.669@116.31 with manifolds....SI
I went back to the track after last weekend going 11.82@115 butt this time I had my bogarts and some ET steets 26x11.50x15 and the weather was a little cooler about 15degs but heres the results
first run:
60ft -----1.638
330ft-----4.752
1/8-------7.423@92.16
1/4-------11.669@116.31
second run:
60ft------1.613<<<<throttle cable came off
330ft----7.138
1/8------14.990@26.86
then the track got oiled down and the they said everyone runs 1/8 so I waited for one more run .
third run:
60ft----1.618
330ft---4.726
1/8-----7.38@91.86
which should be good for a high 11.58 or a low 11.61
Time to put the mac headers on the car and a ASP pulley.
first run:
60ft -----1.638
330ft-----4.752
1/8-------7.423@92.16
1/4-------11.669@116.31
second run:
60ft------1.613<<<<throttle cable came off
330ft----7.138
1/8------14.990@26.86
then the track got oiled down and the they said everyone runs 1/8 so I waited for one more run .
third run:
60ft----1.618
330ft---4.726
1/8-----7.38@91.86
which should be good for a high 11.58 or a low 11.61
Time to put the mac headers on the car and a ASP pulley.
Trending Topics
#10
TECH Addict
Join Date: Jul 2002
Location: Somewhere I Belong
Posts: 2,906
Likes: 0
Received 0 Likes
on
0 Posts
Congrats buddy on your best SI
+1 or Kooks stepped headers
peace
Originally Posted by 4thGenCamaro
I would use a stepped header like the Edelbrocks. 1 7/8 is too big for SI.
peace
#11
thanks guys I think my car weight close to 3100 with me in it. This is a 98 shortblock with 241 heads and a LSx78. I'm going to go with the macs since thats what I have . I'm going to put a baby comp cam(XR269HR)and some mildly ported heads that flow 274ish in the car later this fall and see if I can hit high 10's and not have drivablity problems like I see some have here with the big cam and heads even if the car only goes low 11's I'll still be happy.
Theres another web site (EFA) with alot of people saying theirs no way I could go 11.66with bogarts-11.80 with 17"tires with manifolds, but I've seen it done before and it will be done again. I've had nothing but support from this site and continue to stay here and try helping others like they have help me.
Theres another web site (EFA) with alot of people saying theirs no way I could go 11.66with bogarts-11.80 with 17"tires with manifolds, but I've seen it done before and it will be done again. I've had nothing but support from this site and continue to stay here and try helping others like they have help me.
#12
10 Second Club
iTrader: (9)
Originally Posted by 11SECSS
Theres another web site (EFA) with alot of people saying theirs no way I could go 11.66with bogarts-11.80 with 17"tires with manifolds, but I've seen it done before and it will be done again.