what numbers are you runing with Hot Cam?
04-10-2006, 09:00 AM
#2
TECH Fanatic
Join Date: Feb 2002
Location: Middleburg, FL
Posts: 1,329
Likes: 0
Received 0 Likes
on
0 Posts
BBK 58, CSR EWP, Hooker LTs Mufflex 3"-4" ORY and Mufflex 4" single. Heads milled and cleaned at cam swap (nothing really) PCMforless tune
335/355 on a less aggressive tune (315/335) with 125 shot it put down 445/545
13.1@109 12.1@118 spinning badly on shitty tires/60' (2.5)
M6 car BTW
335/355 on a less aggressive tune (315/335) with 125 shot it put down 445/545
13.1@109 12.1@118 spinning badly on shitty tires/60' (2.5)
M6 car BTW
04-10-2006, 09:41 AM
#3
TECH Fanatic
iTrader: (25)
Join Date: Nov 2001
Location: SC
Posts: 1,784
Likes: 0
Received 0 Likes
on
0 Posts
I got my 94 Z28 down to 11.96 with the LT4 H/I/HOT Cam, pulled 340ish on the dyno and did more track tuning. This was with all bolt ons plus a TH350/3.73, car was about 3500#s.
Same day went 11.17 with a 100shot!
Same day went 11.17 with a 100shot!
04-10-2006, 12:49 PM
#4
12 Second Club
iTrader: (10)
Join Date: Jul 2005
Location: MONTGOMERY,AL
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
I have a 95z, Im putting down 346 hp 355 tq. With hotcam and boltons. I'm looking for some heads now. I have run the best of a 12.76 @111.82 with a 2.167 60'' spinning 1st thru 3rd on street tires.
04-10-2006, 02:36 PM
#5
TECH Fanatic
Join Date: Oct 2003
Posts: 1,101
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ele-blue95
I have a 95z, Im putting down 346 hp 355 tq. With hotcam and boltons. I'm looking for some heads now. I have run the best of a 12.76 @111.82 with a 2.167 60'' spinning 1st thru 3rd on street tires.
i put down 344 356 with bolt ons, and shorty headers.
ran a 12.3 @111 with a 1.8 60
04-11-2006, 08:32 AM
#6
12 Second Club
iTrader: (10)
Join Date: Jul 2005
Location: MONTGOMERY,AL
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
Yep I know. LOL! Right now I'm waitting to get my spec 2 clutch in with a fidanza lightweight flywheel. Along with some 4.10s. The car should pull preatty good. I also have a new tune that netted around 10 more rwhp to the lower rpms.
04-11-2006, 09:09 AM
#7
12 Second Club
iTrader: (1)
Join Date: Dec 2003
Location: Cleveland, Georgia
Posts: 3,027
Likes: 0
Received 0 Likes
on
0 Posts
Docspeeds Vette (my old electric grape) ran a 12.53@109.7 with ported heads, untuned, shorty headers, 3.73s and MT ET streets. This was after the car was running hot (I.E hot lapped on street tires before he got the slicks). On a day with a better DA, he trapped 114.2 on street tires.
Trending Topics
04-11-2006, 09:23 AM
#8
12 Second Club
iTrader: (7)
Join Date: Jul 2005
Location: Chicago burbs
Posts: 955
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ele-blue95
Yep I know. LOL! Right now I'm waitting to get my spec 2 clutch in with a fidanza lightweight flywheel. Along with some 4.10s. The car should pull preatty good. I also have a new tune that netted around 10 more rwhp to the lower rpms.
04-11-2006, 04:13 PM
#9
Teching In
Join Date: Mar 2006
Location: WEST MICHIGAN
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
383 Numbers 383/LT4 Ran 360 rwhp on the dyno (95 hawk M6)
ele-I second the spec clutch words and i would caution a drag car set up with light flywheel, thats an autocross advantage but slows the launch.
ele-I second the spec clutch words and i would caution a drag car set up with light flywheel, thats an autocross advantage but slows the launch.
04-12-2006, 01:05 AM
#11
On The Tree
iTrader: (7)
Join Date: Feb 2004
Location: Fort Worth tx
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
I dynoed 320 330 in my old CC305 and GTP ported heads,hooker lt's,3.73's,vig3200 and rest of the bolt on's. ran a best of 7.8's in the 1/8th with skinnies and fats with e.t.streets