Flow testing.
04-19-2006, 07:25 PM
#2
TECH Addict
iTrader: (21)
Join Date: Nov 2005
Location: Maine USA
Posts: 2,209
Likes: 0
Received 0 Likes
on
0 Posts
I bench Flowed Dave's Plate, I used wood to protect it in the vice.
The Nozzles I made a Sheet metal shape similiar to the Blackwing to represent the angles and distance they would be at.
I wired the bottle heater up and set it for 1050, heated it up and flowed em.
Here is the vid
Plate and Nozzle flow test
The Nozzles I made a Sheet metal shape similiar to the Blackwing to represent the angles and distance they would be at.
I wired the bottle heater up and set it for 1050, heated it up and flowed em.
Here is the vid
Plate and Nozzle flow test
04-20-2006, 07:38 AM
#3
Originally Posted by Beer99C5
I bench Flowed Dave's Plate, I used wood to protect it in the vice.
The Nozzles I made a Sheet metal shape similiar to the Blackwing to represent the angles and distance they would be at.
I wired the bottle heater up and set it for 1050, heated it up and flowed em.
Here is the vid
Plate and Nozzle flow test
The Nozzles I made a Sheet metal shape similiar to the Blackwing to represent the angles and distance they would be at.
I wired the bottle heater up and set it for 1050, heated it up and flowed em.
Here is the vid
Plate and Nozzle flow test
