Northwest Members - Need a LS2 test subject

I'm looking for a Seattle Area LS2 owner to do some before and after dyno runs with a ported LS2 intake. A stock LS2 is fine. Mods are okay as well.

Basically, I need a before dyno and then we swap a ported LS2 intake on for a dyno run and check out the results.

PM me for details if interested.

I'm looking for a Seattle Area LS2 owner to do some before and after dyno runs with a ported LS2 intake. A stock LS2 is fine. Mods are okay as well.

Basically, I need a before dyno and then we swap a ported LS2 intake on for a dyno run and check out the results.

PM me for details if interested.

Interested in porting an LSX 90mm?

Interested in porting an LSX 90mm?


For a set of Drag Radials... SURE :)

For a set of Drag Radials... SURE :)

It's a possibility, maybe the port + $150 for the DRs. :drive:

We could test the ported LS2 vs a stock LSX 90mm, if someone's familiar w/ the installation procedure.

It's a possibility, maybe the port + $150 for the DRs. :drive:

We could test the ported LS2 vs a stock LSX 90mm, if someone's familiar w/ the installation procedure.

I need to get my hands on a LSX intake so I can look it over. I'm thinking since its fully open it can be worked a lot more than a LS6 or LS2. More work is more time is mo money. I'm sure we can come to some satisfactory arrangement if you want to explore this option.

Still need a current LS2 owner willing to dyno :) Send me a PM!

Come on guys... someone has a LS2 around here that wants a KILLER deal in return for some pimping...

Send me a PM!

Come on guys... someone has a LS2 around here that wants a KILLER deal in return for some pimping...

Send me a PM!


PM sent

I hit ya back with some preliminary info, Russ. We'll stay in touch on this.