Fueling & Injection - Injectors for the 2005 C6?

We're finishing a head and cam swap on a C6.....and we ran into a slight problem. The SVO injectors we have here, have the wrong plug, and they are too tall.

Is there a kit out there that is specific for the 05 and up cars?

racetronix? mototron?

It's saturday, and i'm having a hard time getting in touch with anyone.

Thanks for your time.

J

LS1 style injectors in LS2 car
Wiring http://www.ls1tech.com/forums/showthread.php?t=482980
+ Spacer Kit http://www.katechengines.com/street_performance/engine_parts_detail.php?id=35


OR
Larger LS2 injectors
http://www.lingenfelter.com/store/ln10047.html


Pic of LS2 v LS1 injector
http://hotrod.com/techarticles/engine/113_0503_ls2_19_s.jpg

LS1 style injectors in LS2 car
Wiring http://www.ls1tech.com/forums/showthread.php?t=482980
+ Spacer Kit http://www.katechengines.com/street_performance/engine_parts_detail.php?id=35


OR
Larger LS2 injectors
http://www.lingenfelter.com/store/ln10047.html


Pic of LS2 v LS1 injector
http://hotrod.com/techarticles/engine/113_0503_ls2_19_s.jpg


Thanks dude. Exactly what we needed. I was about to get out the soidering iron and shrink wrap but, this will make it easier.

Car runs fine by the way with stock injectors for the time being.

Katech has developed kits to adapt the Gen 3 LS1/LS6 style injector into the new LS2 and also the truck intake manifolds. Bob

http://www.katechengines.com/street_performance/images/image.php?image=KAT-4096 Fuel injector Adpt. Kit.jpg&width=300&dir=engine_products