crAzy95Z28

iTrader: (3)

well ive had it unhooked for about 4 months. Put it back together and its not warming up.

Could the relay have gone out? or do you think my warmer crapped out on me?

The fuse looks ok.

But does anyone have the diagram for the bottle warmer hook up?

Kyle@NOS

Is it temp. or pressure controlled?

Kyle

crAzy95Z28

iTrader: (3)

it has that lil dyno tune thingy on it.

kinda like a solenoid but it isnt. But it goes on the bottle also.

crAzy95Z28

iTrader: (3)

i dont have to have the bottle open do i?

ls1 jeff

iTrader: (2)

Try bypassing the solenoid.

The bottle doesnt need to be open for the warmer to be on.

DynotuneN2O

iTrader: (13)

You need the bottle open! Adjust the small set screw in between the two termnials until the pressure is where you want it... To test the pressure switch, short out both termnials on the pressure switch and you should hear the relay turn on....
email us at sales@dynotunenitrous.com and we can email you directions...
Dan

crAzy95Z28

iTrader: (3)

i fixed it. was the relay

DynotuneN2O

iTrader: (13)

sweet....we need you for tech calls

crAzy95Z28

iTrader: (3)

let me know. Im looking for some extra money