LT14LIFE JT

iTrader: (1)

OK. I have a friend with a '95 Z28..We are going to the dyno this Friday to have it tuned. What do you think it will put down? Setup is as follows:

LT1 bored .030 9.0:1
AFR 195 LT4 heads with 2.05/1.60s
LT4 intake
Custom grind blower cam 236/242
Powerdyne supercharger with 9psi pulley
Custom methanol injection kit
electric H20 pump
1.6s
Hooker longtubes/ORY, cutout
No A/C
30lb injectors
3400 stall
3.73s

We dynoed it last year and the hp numbers were low with 393hp/476tq
We found out that 7 valves were bent as he bought the heads used.
Those numbers were on a CC305 cam, no methanol, a boost leak making only 4psi. Fixed the valves, changed the cam,got a new head unit for the supercharger, and added the methanol kit and 42lb injectors. Any ideas? We're shooting for ~500rwhp and 500+tq...Agree or disagree?

fabgmc4me

iTrader: (5)

500rwhp+ seems very possible to me. Post the numbers up here after you go, I'm interested to see them.

LT14LIFE JT

iTrader: (1)

Will do..I just want to get some insight before we go. I would hate to get there and see a gain of only 20rwhp after all the hard work, but you got except what you get.

Fahad

I've seen one with same setup for your friend car and put 492rwhp but i don't remember if that car was stroked or not. so good luck

Please post the numbers.