FS: Dynatech LT's and Off-road Y-pipe
#1
TECH Regular
Thread Starter
iTrader: (6)
Join Date: Jul 2005
Location: Spring,Tx
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
FS: Dynatech LT's and Off-road Y-pipe
Hey guys, I'm selling my headers and y-pipe because I'm going with a new set up.
They are NOT the supermaxx dynatech's. They are the standard STEEL Long Tubes.
They were the race version until I had a local performance shop weld on the AIR and EGR hookups, along with the Front 02 sensor hookup.
These headers are for the 98-99 LS1's. They will work on 00-02 if you don't need AIR and EGR. They were ceramic coated about a year and a half ago. They have about 15K miles on them. The only issue they have is the passenger side header has a leak in the inner welds between the primary's. You will need to weld on a new collector.
I'm wanting $450 obo for everything.
VIDEO:
http://video.ls1tech.com/video/09687...A69AAB2208.htm
They are NOT the supermaxx dynatech's. They are the standard STEEL Long Tubes.
They were the race version until I had a local performance shop weld on the AIR and EGR hookups, along with the Front 02 sensor hookup.
These headers are for the 98-99 LS1's. They will work on 00-02 if you don't need AIR and EGR. They were ceramic coated about a year and a half ago. They have about 15K miles on them. The only issue they have is the passenger side header has a leak in the inner welds between the primary's. You will need to weld on a new collector.
I'm wanting $450 obo for everything.
VIDEO:
http://video.ls1tech.com/video/09687...A69AAB2208.htm
Last edited by DarkHawkLS1; 05-22-2006 at 02:09 PM.