dragracing at LVD in NY, 4 C5's, 2 break on first run
05-11-2006, 12:07 PM
#1
Closed ex-Sponsor Account
Thread Starter
Join Date: Mar 2004
Location: LONG ISLAND, NY; MADE IN THE USA
Posts: 513
Likes: 0
Received 0 Likes
on
0 Posts
dragracing at LVD in NY, 4 C5's, 2 break on first run 4 C5's
2-2002 EB Z06's(siriusvette)
2-1999/98 white coupes
both initial runs of the coupes resulted in drivetrain breakage(my guess is the left side output shaft in the diff or output shaft on the trans), both cars were on street tires, drivers noted wheel hop and then the failure, no fluid leakage
plan on dragracing? i'd start w/ the Lingenfelter hardened output shaft and the DTE trans brace
http://www.lingenfelter.com/store/lpe-100501.html
these 2 items will cost about $700, far less than a destroyed diff/trans
siriusvette ran 12.49 @ 115.9 in the Z(LT's w/ Halltech cai on oem supercar's) in the Z
where? Lebanon Valley dragway www.dragway.com , just west of the Mass border via Mass pike
2-2002 EB Z06's(siriusvette)
2-1999/98 white coupes
both initial runs of the coupes resulted in drivetrain breakage(my guess is the left side output shaft in the diff or output shaft on the trans), both cars were on street tires, drivers noted wheel hop and then the failure, no fluid leakage
plan on dragracing? i'd start w/ the Lingenfelter hardened output shaft and the DTE trans brace
http://www.lingenfelter.com/store/lpe-100501.html
these 2 items will cost about $700, far less than a destroyed diff/trans
siriusvette ran 12.49 @ 115.9 in the Z(LT's w/ Halltech cai on oem supercar's) in the Z
where? Lebanon Valley dragway www.dragway.com , just west of the Mass border via Mass pike
