First Time to Track: Bolt-ons = 12.57 @ 111
05-11-2006, 09:06 PM
#1
11 Second Club
Thread Starter
iTrader: (24)
Join Date: Feb 2005
Location: Baton Rouge, LA
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
First Time to Track: Bolt-ons = 12.57 @ 111 I finally made it to the track:
60' - 1.97
1/8 - 8.143
1/4 - 12.57
mph - 111.08
Mods: LT's, Lid, cutout, very mild throttle body work w/o bumpstop mod. Done on fusion street tires with no weight reduction.
I will be returning to the track with dr's, new clutch and a rear with either 4.11 or 4.30's (haven't decided yet)! Hope to cut that 60' to around 1.75 and see some very low 12's. Yes, I aim high, no discouraging comments please.
60' - 1.97
1/8 - 8.143
1/4 - 12.57
mph - 111.08
Mods: LT's, Lid, cutout, very mild throttle body work w/o bumpstop mod. Done on fusion street tires with no weight reduction.
I will be returning to the track with dr's, new clutch and a rear with either 4.11 or 4.30's (haven't decided yet)! Hope to cut that 60' to around 1.75 and see some very low 12's. Yes, I aim high, no discouraging comments please.
05-13-2006, 12:18 PM
#6
11 Second Club
Thread Starter
iTrader: (24)
Join Date: Feb 2005
Location: Baton Rouge, LA
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
Don't have any current dyno numbers. This was a 3,500 rpm launch. Just letting out on the clutch, not dumping it. The track was very well preped. I'm not sure about the 1/8 mile mph, don't have my slip on hand; I'll post it up later.
Trending Topics
05-17-2006, 09:30 PM
#8
11 Second Club
Thread Starter
iTrader: (24)
Join Date: Feb 2005
Location: Baton Rouge, LA
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by paper doll
cool what was your 1/8 mph? do you know what you dyno at btw?
The Slip Reads:
60' ........ 1.971
330 ....... 5.347
1/8 ....... 8.143
MPH ...... 88.24
1000 ..... 10.540
1/4 ....... 12.577
MPH ...... 111.08
Completely Stock #'s (Through Flowmaster Catback):
305/323
I plan on going to a different track next week. I now have the bumpstop mod, and my other poly mount is in. Shifts are much faster and more firm, my drivers-side mount was demolished!
