SD people, talk to me
Trending Topics
05-19-2006, 10:16 AM
#8
Posted pictures a while back: https://ls1tech.com/forums/pcm-diagnostics-tuning/396160-photos-mafless-bellows.html
Or you can click on my signature. There are some nice pics on my website.
Or you can click on my signature. There are some nice pics on my website.
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
Last edited by Patrick G; 05-19-2006 at 10:29 AM.
06-05-2006, 08:23 PM
#12
10 Second Club
iTrader: (5)
Join Date: Nov 2003
Location: Charleston, SC
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MrDude_1
jay, you should post up some pics of your new setup... maybe make a how-to... lol
Originally Posted by orangeapeel
Making a how to will get it stickified. I say do it and post it....then let me know.
I'll try to get some pics up this week. I think it came out pretty good.
06-06-2006, 08:26 AM
#16
Originally Posted by orangeapeel
Making a how to will get it stickified. I say do it and post it....then let me know.
nevermind.
06-16-2006, 01:24 AM
#19
On The Tree
iTrader: (12)
Join Date: Dec 2004
Location: Worthington, KY
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
Not the cleanest engine, just got done removing my nitrous kit today and doing some other work. But this is my SD solution, 3 1/2" stainless pipe brushed with a grinder and a wire wheel, good to go.
And yes I know, teh gay Summit sticker is coming off, was overexcited two years ago when I did my first mods and just had to do it. More than a couple dozen mods later its still on there
And yes I know, teh gay Summit sticker is coming off, was overexcited two years ago when I did my first mods and just had to do it. More than a couple dozen mods later its still on there
