should i get asp underdrive pully with my heads and cam
#1
TECH Enthusiast
Thread Starter
Join Date: Nov 2002
Location: Michigan, auburn HIlls
Posts: 550
Likes: 0
Received 0 Likes
on
0 Posts
should i get asp underdrive pully with my heads and cam
should i get a underdrive pully with for my head and cam car. From what i have heard many people see no difference in power.
How about dampening effect. Would the asp be better for the engine?
How about dampening effect. Would the asp be better for the engine?
#3
Staging Lane
Join Date: Jul 2002
Location: Fullerton, CA
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Re: should i get asp underdrive pully with my heads and cam
This is a controversial topic. From what I have seen, many people have seen 5-10 hp increases. However, I have heard that the aftermarket pullies can cause catastrophic damage in the long run. It has to do with engine harmonics.
#4
Re: should i get asp underdrive pully with my heads and cam
When I installed my ASP pulley, I picked up 12 rwhp. I noticed a big difference in how the car accelerates and revs. Not sure on the long term damaged since it doesn't dampen as well as the stock one. Its worth it to me for the power increase.
#5
10 Second Club
Re: should i get asp underdrive pully with my heads and cam
I recently telephoned ASP and asked the person who answered how their pulley compared to the stock balancer. I was told that it is equivalent below 6000 rpm and that they have not tested it beyond 6000 rpm. The 10% underdrive ATI pulley is reportedly used by Winston Cup racers at very high engine speeds. The ATI unfortunately, is quite expensive.