First pass on the 427!

Thread Tools
 
Search this Thread
 
Old 05-21-2006, 09:12 PM
  #1  
8 Second Club
Thread Starter
iTrader: (1)
 
Mr Powell's Avatar
 
Join Date: Nov 2001
Location: Friendswood
Posts: 10,121
Likes: 0
Received 0 Likes on 0 Posts

Default First pass on the 427!

We put a set of ET-Streets on the car tonight and opened the cutouts and headed towards HRP.

On the way there we destroyed a GSXR 600, he hit it and Matt hit it and Matt put a few cars on him instantly. Matt started in 3rd gear (Which he should have been in 2nd), but there is a reason for that. There are some solid black marks from hitting it in 2nd on the freeway on ET-Streets.

We get to the track and we just got one pass on it before we left. We told him not to do a burn out, because he's had the car back less then a week and with our luck he'd break something. Chris told him to leave like a stop light, so he won't break 11.50s, wait till the car got up to 3500 RPM and then lay it down. He does that exactly... The 10 second Mustang takes off next to him, and all the sudden you see Matt stop his pull and start coming back on him. The lights flash up and a 11.8 @ 129.93 mph pops across the board. We took the car back to the back and it weighed 3295 with Matt in the car. The 60ft was a 2.35 and the 1/8th was almost 102mph.

Keep in mind this is leaving like its off a stop light and waiting till 3500 to floor it. We are going to go back to the track and going to go for some easy 10s at over 131-132 mph. Not bad for a car with LS1 Heads, No Electric Waterpump, Stock front tires, and 17" ET-Streets.
Old 05-21-2006, 09:17 PM
  #2  
Banned
iTrader: (1)
 
408WS6's Avatar
 
Join Date: Dec 2005
Location: Houston
Posts: 652
Likes: 0
Received 0 Likes on 0 Posts
Default

Once he gets his 60' down he ought to be low 10s for sure...
Old 05-21-2006, 09:17 PM
  #3  
LS1Tech Co-Founder
iTrader: (38)
 
Nine Ball's Avatar
 
Join Date: Nov 2001
Location: Houston, TX
Posts: 32,987
Likes: 0
Received 45 Likes on 19 Posts

Default

why did you only make one pass? Was the track busy or did something happen?

When are you going back, maybe I'll meet you there in my Vette and we can practice sandbagging together
Old 05-21-2006, 09:20 PM
  #4  
TECH Veteran
iTrader: (30)
 
LS69TA's Avatar
 
Join Date: Jan 2003
Location: Texarkana, Tx
Posts: 4,391
Likes: 0
Received 0 Likes on 0 Posts

Default

Damn. That car is going to put up some serious numbers when you do get around to launching it off the line
Old 05-21-2006, 09:22 PM
  #5  
Curveball TECH
iTrader: (1)
 
TRANSdAMn 2k's Avatar
 
Join Date: Aug 2005
Location: Galleria
Posts: 381
Likes: 0
Received 0 Likes on 0 Posts

Default

The powell's would never sandbag anyone, you know that!!
Old 05-21-2006, 09:32 PM
  #6  
TECH Fanatic
iTrader: (8)
 
SSilverSSurfer's Avatar
 
Join Date: Jul 2004
Location: College Station/Pasadena
Posts: 8,182
Likes: 0
Received 0 Likes on 0 Posts
Default

whyd you guys leave? i saw you there when i showed up..i was in the black Z with black zr1's...car sounded mean i msut have just missed the pass....track wasnt busy tony to answer your question...did you guys race the red mustang?
Old 05-21-2006, 09:33 PM
  #7  
10 Second Club
iTrader: (3)
 
NVR4GET's Avatar
 
Join Date: Nov 2003
Location: HTOWN
Posts: 544
Likes: 0
Received 0 Likes on 0 Posts

Default

Kooks = 1.. Us = 0. Blew the Airtube Inlet off
Old 05-21-2006, 09:34 PM
  #8  
8 Second Club
Thread Starter
iTrader: (1)
 
Mr Powell's Avatar
 
Join Date: Nov 2001
Location: Friendswood
Posts: 10,121
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by Nine Ball
why did you only make one pass? Was the track busy or did something happen?

When are you going back, maybe I'll meet you there in my Vette and we can practice sandbagging together

LOL soon, maybe Wednesday night.

We didn't make another pass because Kooks has a flaw on some of their A.I.R. tubes where the welds failed. Well guess what it did? It blew the fck off! LOL Chris is going to weld it up tomorrow and we will be ready to go again.

So Kooks = 1.. Us = 0.. LOL!
Old 05-21-2006, 09:37 PM
  #9  
TECH Fanatic
iTrader: (8)
 
SSilverSSurfer's Avatar
 
Join Date: Jul 2004
Location: College Station/Pasadena
Posts: 8,182
Likes: 0
Received 0 Likes on 0 Posts
Default

good luck i knwo it has the potential....
Old 05-21-2006, 09:44 PM
  #10  
10 Second Club
iTrader: (45)
 
INVISIBLEZ's Avatar
 
Join Date: Dec 2004
Location: Seabrook, TX
Posts: 1,516
Likes: 0
Received 0 Likes on 0 Posts

Default

Atleast it drove home from the track under it's own power..... I was @ the Chevron when I seen ya'll leaving.
Old 05-21-2006, 09:49 PM
  #11  
Moderator
iTrader: (33)
 
BizZzatch350's Avatar
 
Join Date: Dec 2001
Location: T E X A S
Posts: 9,787
Likes: 0
Received 11 Likes on 9 Posts

Default

All in time man, that Vettes gonna rip hard
Old 05-21-2006, 09:55 PM
  #12  
TECH Senior Member
 
Toxic Texan's Avatar
 
Join Date: Nov 2001
Location: Friendswood,TX
Posts: 8,423
Likes: 0
Received 0 Likes on 0 Posts

Default

Nice!!!
Old 05-21-2006, 10:05 PM
  #13  
TECH Junkie
iTrader: (21)
 
bluestreak98's Avatar
 
Join Date: Jan 2002
Location: Tomball, TX
Posts: 3,193
Likes: 0
Received 19 Likes on 16 Posts

Default

i want some MFing pictures of this thing.

car sounds like a beast!
Old 05-21-2006, 10:15 PM
  #14  
8 Sec Builder
 
The Machinist's Avatar
 
Join Date: Sep 2004
Location: Houston Tx
Posts: 80
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Mr Powell
We put a set of ET-Streets on the car tonight and opened the cutouts and headed towards HRP.

On the way there we destroyed a GSXR 600, he hit it and Matt hit it and Matt put a few cars on him instantly. Matt started in 3rd gear (Which he should have been in 2nd), but there is a reason for that. There are some solid black marks from hitting it in 2nd on the freeway on ET-Streets.

We get to the track and we just got one pass on it before we left. We told him not to do a burn out, because he's had the car back less then a week and with our luck he'd break something. Chris told him to leave like a stop light, so he won't break 11.50s, wait till the car got up to 3500 RPM and then lay it down. He does that exactly... The 10 second Mustang takes off next to him, and all the sudden you see Matt stop his pull and start coming back on him. The lights flash up and a 11.8 @ 129.93 mph pops across the board. We took the car back to the back and it weighed 3295 with Matt in the car. The 60ft was a 2.35 and the 1/8th was almost 102mph.

Keep in mind this is leaving like its off a stop light and waiting till 3500 to floor it. We are going to go back to the track and going to go for some easy 10s at over 131-132 mph. Not bad for a car with LS1 Heads, No Electric Waterpump, Stock front tires, and 17" ET-Streets.


Good job guys, glad your happy with everything
Old 05-21-2006, 10:19 PM
  #15  
TECH Senior Member
 
| Powered by Satan |'s Avatar
 
Join Date: Apr 2004
Location: Houston / University of Texas, Austin
Posts: 6,955
Likes: 0
Received 0 Likes on 0 Posts

Default

bad *** to hear! get that time down then time to hose it down!!!!
Old 05-21-2006, 10:24 PM
  #16  
TECH Fanatic
iTrader: (8)
 
SSilverSSurfer's Avatar
 
Join Date: Jul 2004
Location: College Station/Pasadena
Posts: 8,182
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by bluestreak98
i want some MFing pictures of this thing.

car sounds like a beast!
pics wont do justice...you need to see it and hear it in person
Old 05-21-2006, 10:25 PM
  #17  
TECH Senior Member
iTrader: (24)
 
Reject's Avatar
 
Join Date: Apr 2005
Location: Texas
Posts: 9,197
Received 4 Likes on 3 Posts

Default

Originally Posted by bluestreak98
i want some MFing pictures of this thing.

car sounds like a beast!


x2
Old 05-21-2006, 10:26 PM
  #18  
8 Second Club
Thread Starter
iTrader: (1)
 
Mr Powell's Avatar
 
Join Date: Nov 2001
Location: Friendswood
Posts: 10,121
Likes: 0
Received 0 Likes on 0 Posts

Default

Again thanks to Chris E., Cam, Jayson, and the rest of MTI for all the bad *** work!
Old 05-22-2006, 01:52 AM
  #19  
FormerVendor
iTrader: (1)
 
IconAutoSports's Avatar
 
Join Date: Apr 2004
Location: Houston, TX
Posts: 663
Likes: 0
Received 0 Likes on 0 Posts
Default

Congrats to the Powells and the MTI crew! Looks like you guys got your hands full with that beast! Be careful!
Old 05-22-2006, 02:06 AM
  #20  
TECH Senior Member
iTrader: (18)
 
DONAIMIAN's Avatar
 
Join Date: Jun 2002
Location: NW Houston, TX
Posts: 10,036
Likes: 0
Received 0 Likes on 0 Posts

Default

Congrats. Car has a lot of potential.



All times are GMT -5. The time now is 02:53 PM.