Tr230/224 Finally In!!!
#1
Tr230/224 Finally In!!!
http://media.putfile.com/1999-camaro-ss-TR230224-cam
LEMME KNOW WHAT YOU ALL THINK..STILL NEED SOME TUNING TO DO
LEMME KNOW WHAT YOU ALL THINK..STILL NEED SOME TUNING TO DO
#6
TECH Resident
iTrader: (6)
Join Date: Feb 2004
Location: Houston
Posts: 823
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CrawlinWS6
Had the same cam. Not a great performer, but sounds great!
Congrats on the cam install - tune.
Brian
Trending Topics
#8
Import Patrol
iTrader: (41)
Join Date: Jul 2005
Location: Brookfield, IL
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Hagarr
Huh? With correct installation and tuning this cam is a great performer. You are the only one I have ever seen say otherwise.
Congrats on the cam install - tune.
Brian
Congrats on the cam install - tune.
Brian
#10
TECH Regular
iTrader: (5)
Join Date: Apr 2002
Location: DFW
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CrawlinWS6
With this cam, and full bolt ons, and 3500 stall, it dynoed at 360rwhp, and ran 1 tenth faster in the 1/4 then I ran with just bolt on's
#2. I would be willing to bet that the conditions and 60 ft ect. were a lot different between the runs at the track.
#12
yeah i know the cam is a great performer regardless of what people say.....but all comments are appreciated.....the car has been slightly wrecked from the rear passenger quarter but never from the front end........a girl at work had back up into the nose once and i had it repainted i guess the damn bodyshop didnt line it up right but i've never noticed...anyways the topic is about the cam not the looks.....the car was actually semi-tuned when i took the vid.....i still need to play with the air/fuel mixture and the timing a bit on the dyno
the exhaust consist of some crappy dynatech lt's with a custom 3 inch y...going into a cut out before the rearend......no muffler!......i plan on either putting a bullet or a sweet thunder chammberd muffler in the next few weeks....but yeah she is pretty loud for being straight pipe....other mods i did before i took the beast out are
ls6 intake
asp underdrive pulley
comp 918 springs
comp titanium retainers
manly 7.4 chrome moly pushrods
a set of 241 heads with 30k on them
polished the waterpump
powdercoated the timing chain cover
runs pretty good....love the way it sounds....and not that bad on gas!!!
the exhaust consist of some crappy dynatech lt's with a custom 3 inch y...going into a cut out before the rearend......no muffler!......i plan on either putting a bullet or a sweet thunder chammberd muffler in the next few weeks....but yeah she is pretty loud for being straight pipe....other mods i did before i took the beast out are
ls6 intake
asp underdrive pulley
comp 918 springs
comp titanium retainers
manly 7.4 chrome moly pushrods
a set of 241 heads with 30k on them
polished the waterpump
powdercoated the timing chain cover
runs pretty good....love the way it sounds....and not that bad on gas!!!
#14
Import Patrol
iTrader: (41)
Join Date: Jul 2005
Location: Brookfield, IL
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Griswold
#1. Auto's don't dyno very high, especially with a stall. What did you dyno before with the cam being the only change? Tuning also makes a difference.
#2. I would be willing to bet that the conditions and 60 ft ect. were a lot different between the runs at the track.
#2. I would be willing to bet that the conditions and 60 ft ect. were a lot different between the runs at the track.
And weather was about the same, high 70's. And 60ft were both in the 1.7 range
#16
TECH Regular
iTrader: (4)
Join Date: Sep 2002
Location: Rostraver, PA
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CrawlinWS6
Had the same cam. Not a great performer, but sounds great!
11.66 here with that cam with stock heads, clutch and full weight.
Seems like a great PERFORMER for me.
#17
Originally Posted by 2002SilverWS-6
11.66 here with that cam with stock heads, clutch and full weight.
Seems like a great PERFORMER for me.
Seems like a great PERFORMER for me.
#18
TECH Fanatic
iTrader: (1)
Join Date: Jul 2005
Location: Earth
Posts: 1,682
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by steveo346
WOW THAT BE A SWEET NUMBER TO RUN..HOW DID YOU ACHEIVE THAT..WHATS OTHER MODS DO YOU HAVE BESIDES THAT CAM.....AND WHAT ARE YOU RUNNING A M6 OR AUTO...WHAT DID YOU DYNO AT?
If you check his signature, all your questions will be answered.....