bobby1

what is the difference between the x4 and x5 cam?

JZ'sTA

iTrader: (23)

very little. The X 5 is a bit bigger and might make a bit more peak HP.
Might also be a touch less street friendly.

allngn_c5

iTrader: (3)

Haven't heard of the "X5" Is it the G5X5?? WHO makes it?? Do you have specs?

erikthegoalie

iTrader: (29)

Hey Doug....sup man...I heard that they have up to an X7!! IN the new z06....
but i may be wrong...how ya been..i spoke to Bobby, nice guy
erik
sorry to hijack

allngn_c5

iTrader: (3)

The G5 refers to the cams for the LS1's, LS2's and LS6's
The G7 refers to the cams for the LS7 C6 ZO6

No such thing as a G5X5 as far as I know.

erikthegoalie

iTrader: (29)

tru dat

bobby1

the xx or x5 is a race only came that they ran in there world cup race car it ran 10's at like 140 they have a video on it and at the time it was the fastest head and cam car out there and still maybe!

bobby1

the reason i ask is they are telling me the xx or x5 is to much cam for the street but it only makes 15 more horsepower rear wheel

allngn_c5

iTrader: (3)

I think you are right. I wasn't thinking about the one in the race car. Sorry. I couldn't imagine driving that thing on the street, idling at 1600 rpms and ready to launch like a bat outta hell.

bobby1

should i flycutt and go with this xx or not flycut and do x4 and flycutt later when i put on my afrs

allngn_c5

iTrader: (3)

I am not sure about flycutt now and do the xx, or no flycutt x4 and wait until you get the AFR's to flycutt. Why not flycutt and do xx with the AFR's at the same time.
Is that an option?

bobby1

thats what i'm going to do is do is do the xx or 5x and do the afr later because of the cost for the heads i'm doing these in stages

allngn_c5

iTrader: (3)

Could you save your money for a week or two and do it all at once, so you don't have to go back in there?? JMO

bobby1

its going to take me maybe 3 or 4 months to drop 2500.00+ for some afrs and then the install charge probably about 4000.00 i would need

allngn_c5

iTrader: (3)

Hey Bobby, LG has a h/c pkg for 2999.00 + install. You can get it all for $4,000 if you preschedule and show up on time or early. In and out in a day, tuned and driving. Double check with Bobby@LG, don't quote me. LOL I hope you see what they can do for ya first. GOOD LUCK !!!!!

bobby1

thanks for the input

DONAIMIAN

iTrader: (18)

The cam they use in the race car is the Grand Am Cup Cam. Its a cam thats made by GM. They are required by the rules to run this cam and the specs are 239/251 106LSA. If they could run the cam of their choice then they would run away from every race with a win.

bobby1

as far as i know its there cam not a gm cam take a look at their website lg motorsports.com all their cams are their own