blackss4377

Well guys I finally got my car dynoed today. My car is a 2001 camaro ss A4, with a slp air lid and a cut-out. I dynoed 329hp and 340tq and I was just wondering if these were good numbers.

kazfan30

iTrader: (18)

Actually i would say that was Damn good for 2 mods. Most A4 cars round that year barely hit 300 rwhp some less and some more.

99camarosupersport

iTrader: (6)

ya pretty damn good imo.

jbres79

thats damn good compared to me with almost same mods.

312/333

staringback05

iTrader: (8)

yea better then mine to...325/338 hmm? i think mines a little low, i need a tune

'Trust'

iTrader: (24)

Very good, mine did 316/341 with a lid and a cut out. I also had lesser heads and an LS1 intake.

TBK'SS

iTrader: (1)

Good numbers! My brothers 01 SS a4 was at 309/323 with just a lid. I guess a cut-out really helps.

ULTIMATEORANGESS

iTrader: (4)

yes,cutouts do tend to free up some good power.

Urban Legend

iTrader: (5)

Be happy with those numbers. I am assuming those numbers are on a dynojet, right?

davered00ss

iTrader: (4)

Those are great #'s for an A4.

slimcracka

iTrader: (7)

most a4 guys cant get taht # with LTs and ls6...great #s man...it might be the famous "factory freak" now go get some track times...

Wicked_Hugger99

iTrader: (1)

'01-'02 LS1 fbods obviously dyno a little better then '98-'00 LS1s cuz of the LS6 intake etc etc. but thats still very damn good for an '01 A4 w/ only a lid and cut-out. You have 2.73s or optional 3.23 gears?? Congrats, you should be capable of mid-high 12s@108mph+ easily w/ some traction!!! deep 12s w/ a good verter and some gears!!
For comparison sake, my 98 TA A4 (before F14cam, ud pulley, and 12-bolt)with Pacesetter 1.75in LTs running open, LS6 intake, ported TB, SLP lid, k&n, smooth bellow, free mods, built 4L60-E w/ vig3200, stock 10-bolt w/ 2.73s etc. etc. did 324rwhp locked if i remember correctly
My old 99 Z A4 (before F11 cam, LS6 intake, and vig3200) did bout 334rwhp locked with built 4L60-E w/ stock verter, SLP Lid w/ k&n, Mac 1 3/4 mids into 3in bullets off the hedders, stock 10-bolt w/ 3.42s, ud pulley, ported TB, free mods, etc etc