Whats an acceptable TC clearance...
05-28-2006, 07:40 PM
#1
10 Second Club
Thread Starter
iTrader: (5)
Join Date: Nov 2001
Location: Cali/Bay Area
Posts: 3,412
Likes: 0
Received 0 Likes
on
0 Posts
Whats an acceptable TC clearance... between the flexplate and torque converter pads when installing your trans? I have read a couple different instructions and one says it needs to be 1/16-1/8" and then another one says it should be 1/8-3/16" clearance. I have 3/16" and I'm thinking about shimming it 1/16". Is this acceptable or is the 3/16" fine?
Thanks,
Dan
Thanks,
Dan
05-29-2006, 12:19 AM
#2
Rossler says 1/8" on a 2 speed and 3/16" on 3 speeds-
Click this> http://www.rosslertrans.com/Converter%20Spacing.htm
Click this> http://www.rosslertrans.com/Converter%20Spacing.htm
Last edited by SLowETz; 05-29-2006 at 12:28 AM.
05-29-2006, 02:20 AM
#3
10 Second Club
Thread Starter
iTrader: (5)
Join Date: Nov 2001
Location: Cali/Bay Area
Posts: 3,412
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SLowETz
Rossler says 1/8" on a 2 speed and 3/16" on 3 speeds-
Click this> http://www.rosslertrans.com/Converter%20Spacing.htm
Click this> http://www.rosslertrans.com/Converter%20Spacing.htm
Dan