Steve1969LS1

iTrader: (1)

Well my new Siemens Deka 30# injectors arrived last night.. I cant believe how much bigger and better made they feel than the 24# stock units.. while the stock ones are plastic these are steel..

see the difference:
<img src="http://members.aol.com/steven0932/fuel.jpg" alt=" - " />

Ive heard very good things about these and that they use a better design than the Bosch or SVT injectors (rotating disc).. They certainly seem well made. I found them for a good price also, $229! A must do if your doing your intake anyways <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

In other news the cam, 918's, pushrods, LS6 oil pump and Katech chain are all installed.. now to wait for the intake to show up <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

Thanks to Ireland31 (Eric) for his huge effort in helping me with this.. especially the springs..

<small>[ February 08, 2003, 12:06 PM: Message edited by: Steve2000SS ]</small>

Bad 00 SS

Steve, what intake are u getting, a holley LS6 or an slp one? and what color are u going with?

Steve1969LS1

iTrader: (1)

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by jmX:
<strong> </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Steve2000SS:
<strong> A non-EGR Z06 intake.. and so far Pewter is in the lead with red fuel rails (NOT fuel rail covers) <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">NOOOOOOOOOO...don't screw up that car like that. Red+pewter = <img border="0" alt="[barf]" title="" src="graemlins/gr_barf.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">OH MY GOD!! Your right!.. no wonder everyone tells me my engine area looks like <img border="0" alt="[barf]" title="" src="graemlins/gr_barf.gif" />

<img src="http://members.aol.com/steven0932/engine1.jpg" alt=" - " />

I know its hard but please try to stay on topic <img border="0" title="" alt="[Roll Eyes]" src="images/icons/rolleyes.gif" />

01Z0H6

iTrader: (63)

Steve, may i ask where you guys get the piece underneath your FIPK?
I am considering this mod myself along with the FIPK.
Thanks, Matt

Fenris Ulf

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by PewterY2KZ28:
<strong> Steve, may i ask where you guys get the piece underneath your FIPK?
I am considering this mod myself along with the FIPK.
Thanks, Matt </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">It comes with it I believe.

DONAIMIAN

iTrader: (18)

I like the way your engine compartment looks the way it is right now. BTW did you custom mold for carbon fiber yourself out of sheets, or did you have someone else do it. Nice <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />

unit213

It's nice to see that your finally getting some internal work done Steve. What cam (specs)?

Trojan T/A

iTrader: (1)

Steve, cant wait to see how your new set up does. My recommendation is to paint the intake red and keep your fuel rail covers pewter. Then you will match with the FIPK hoses and the valve covers.

Steve1969LS1

iTrader: (1)

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by camaro_ls1:
<strong> It's nice to see that your finally getting some internal work done Steve. What cam (specs)? </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">TR220 .561 114LSA cam.. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> -- yep, suspension is almost done so time for some more go mods..

Stang Killer: Those are OEM pieces I had covered..

Trojan: I was thinking that but too much red.. I want a very clean modern look..

Yes, that part comes with the FIPK but I had it color matched to the car <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> (comes black)

Steve1969LS1

iTrader: (1)

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Bad 00 SS:
<strong> Steve, what intake are u getting, a holley LS6 or an slp one? and what color are u going with? </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">A non-EGR Z06 intake.. and so far Pewter is in the lead with red fuel rails <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> .. Second choice for the intake was charcoal grey metallic but I wanted a lighter color..

I just pulled out the AC compressor and all the hoses and brackets.. i wonder what I could do to all of that??? <img border="0" alt="[evil]" title="" src="graemlins/gr_devil.gif" /> -- now on to the power steering system and alternator.. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

jmX

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Steve2000SS:
<strong> A non-EGR Z06 intake.. and so far Pewter is in the lead with red fuel rails <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">NOOOOOOOOOO...don't screw up that car like that. Red+pewter = <img border="0" alt="[barf]" title="" src="graemlins/gr_barf.gif" />

Louis

iTrader: (7)

Eric is a good kid <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> Tell him Louis says hi <img border="0" alt="[chug]" title="" src="graemlins/gr_chug.gif" />

01Z0H6

iTrader: (63)

Thanks!

Modsquad

iTrader: (6)

I've seen a red intake before & it looked like ***. Maybe just a nice high gloss black finish?

BB

iTrader: (7)

Where did you get those injectors for that price?

Steve1969LS1

iTrader: (1)

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Modsquad:
<strong> I've seen a red intake before & it looked like ***. Maybe just a nice high gloss black finish? </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Red intake was never an option.. it will either be charcoal grey metallic or Pewter <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

FlamnTA: email me at steven0932@aol.com since they are not a sponsor <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> -- $229 for the 30# and $299 for the 36# as I recall..