lash caps with ARE heads
06-05-2006, 09:46 PM
#1
TECH Enthusiast
Thread Starter
Join Date: Nov 2001
Location: Rockland County, NY
Posts: 696
Likes: 0
Received 0 Likes
on
0 Posts
lash caps with ARE heads I'm trying to track down a ticking from my engine (suspect lifter at this point) and I had my rockers and pushrods out. I have old ARE LS1 heads and they came setup with lash caps and 7.20" pushrods. When I was putting the rockers back on, I noticed I was missing a lash cap on one valve. I don't know if I lost it when I took the rocker arm off or if it was missing this whole time 
In any event, does anyone know what the proper size lash caps were used with ARE Stage 2 LS1 heads? It's not like I can call them
In any event, does anyone know what the proper size lash caps were used with ARE Stage 2 LS1 heads? It's not like I can call them
06-05-2006, 10:46 PM
#2
FormerVendor
iTrader: (7)
Join Date: Jan 2002
Location: Toronto, Canada
Posts: 1,940
Likes: 0
Received 0 Likes
on
0 Posts
Probably 11/32 caps... I used to work there... Can you measure the valve tip width with a dial caliper? I should have spares kicking around I can send you.
