TaTommyWS6

I would never have believed how loud, obnoxious, and ear piercing this combo would be!

So, I ordered this: Item# = 289-24219
Description = Dynomax Magnum Race Bullet Mufflers 3'' In/Out, 18'' Long

to put in place of the resonator that comes with the Loudmouth system.

Can I just clamp this on? Or does it have to be welded?

Thanks!

Tommy <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

Phil99TA

Dude, tell me about it! That is the most awful sounding combination possible. It is unbearable <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> I think the bullet muffler will help somewhat, but it's still gonna be bad. I would weld 2 bullet mufflers in the Y pipe and/or get a different catback

TaTommyWS6

Yeah, I love LOUD exhaust, but I dread even touching the gas pedal for fear of hitting the aweful 2200-2800 rpm range....

Although, I do have to say it was funny as hell when the lady holding a cup of coffee in one hand while driving on the highway next to me nearly spilled it all over helself when I hit my gas! <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> She must have thought her engine exploded or something! The look on her face was priceless! <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />

It seems like the "longer" bullet muffler that I ordered will help quite a bit according to others that have the same setup... I hope....

Tommy <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

<small>[ March 06, 2003, 10:10 AM: Message edited by: TaTommyWS6 ]</small>

akaceril

I know what yoiu mean I have the same set-up. but I am gonna go with true duals. at least then I can have 2 mufflers

onyxxtreme

iTrader: (4)

TA Tommy: Do you still have the MAC ball flange on the headers ?

TaTommyWS6

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Stew Peddassle:
<strong> TA Tommy: Do you still have the MAC ball flange on the headers ? </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Yes, I still do. Unfortunately I want to do the least expensive fix for now ($35 bullet muffler). Maybe in the future I'll modify the collectors, but I don't have the cash right now. Very good suggestion though thanks!

Tommy <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

99MONGOOSE

I just checked Summits website and the 24219 is 23 inches long, isn't it? I to need to swap out the resonator in my LM. I can't see spending $180 for the Borla XR1. The Borla is a 5 inch case and the dynomax is a 4 inch case so theres more clearance with the dynomax. I am running Grott headers, 3 inch y-pipe, no cats, and LM exhaust. I define the word RASP. <img border="0" alt="[cry]" title="" src="graemlins/gr_cry.gif" /> AND thats not funny! I would like to swap to the Hooker catback but I don't want to drop that kind of cash right now. Will a single dynomax bullet really help that much or will we need more?

Reckless

iTrader: (9)

I welded a Flowmaster Race muffler (single chamber) on each side of the y-pipe and the rasp is history. Also have the bullet where the resonator was. Sounds deep and nasty with no rasp. I do get quite a bit of popping on deceleratio though, but I think it makes it sound more exotic <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

Part number 389-325108 form Jegs

http://www.jegs.com/cgi-bin/ncommerc...10&prmenbr=361

BLUEBALLS ZZ

iTrader: (2)

i have the mac ORP and a magnaflow cat back. belive it or not it sound pretty good.doesn't rasp to bad. from all that i heard i thought mine sounded the best with an after market cat back. my G/F has a stock cat back and it sounds even better

99MONGOOSE

ttt

onyxxtreme

iTrader: (4)

i say, get the longest bullet you can fit on the I-pipe (that dynomax makes though)
It's hola better than the LM's so called expansion pack

btw, i heard a TA with MAC's/ORP/dynomouth(loudmouth with bullet)
and it sounded SWEET!! <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

TaTommyWS6

I'm getting the muffler welded on tonight. I hope it sounds good! (It is the long one)

Tommy <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

99MONGOOSE

I am going to pull off my Loudmouth and throw it on my WS6 since it still has its cats. I think I am going to buy a SLP dual dual for the SS and have a QTP cut-out installed, but also a short bullet muffler in the intermediate pipe right before the cut-out. That way I can cruise with the DD and be somewhat tame then when the time is right hit the switch and be LOUD!!!! Grotts, Or pipe, cutout....hmm sounds loud to me!

White_Hawk

iTrader: (3)

I have the MAC's and ORY with the dual/dual on my Firehawk right now. They were just installed a couple weeks ago and I only drove it fromn the trailer back to the garage (too much salt on the roads here in the big mitten). I did not notice it being raspy at all. In fact, I had originally planned on doing bullets in the y-pipe but I don't even think that is going to be necessary. It is still pretty quiet - just like I like it (going for stealth power).

-Geoff

TaTommyWS6

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by White_Hawk:
<strong> I have the MAC's and ORY with the dual/dual on my Firehawk right now. They were just installed a couple weeks ago and I only drove it fromn the trailer back to the garage (too much salt on the roads here in the big mitten). I did not notice it being raspy at all. In fact, I had originally planned on doing bullets in the y-pipe but I don't even think that is going to be necessary. It is still pretty quiet - just like I like it (going for stealth power).

-Geoff </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">That's because dual/dual's are awesome!

Tommy <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />