Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

My Goal: Run 10s with stock internals.

Thread Tools
 
Search this Thread
 
Old 03-13-2003, 12:48 AM
  #1  
Launching!
Thread Starter
 
NO F-BDY BS's Avatar
 
Join Date: Nov 2002
Location: S'port
Posts: 207
Likes: 0
Received 0 Likes on 0 Posts

Default My Goal: Run 10s with stock internals.

I have seen many cars run in the 11s with bolt-ons, weight reduction, and stock internals What I would like to do is get in the 10s with bolt-ons and a TNT kit, 150 shot most likely. My car is a M6 so a 12-bolt with 4.10s will be a necessity.I know that an a4 would be better suited for this task, but Id like to do it with the a stick car. I dont know if this is possiable, but I think that this setup would put me real close to the high 10s. Anyone know of anyone else who has done this? Any thoughts?


__________________
Old 03-13-2003, 12:51 AM
  #2  
TECH Enthusiast
iTrader: (1)
 
Trojan T/A's Avatar
 
Join Date: Apr 2002
Location: So. Cal
Posts: 523
Likes: 0
Received 0 Likes on 0 Posts

Default Re: My Goal: Run 10s with stock internals.

10s should be no problem with full boltons, weight reduction and a 150 shot. That 150 shot, if tuned correctly, will add more hp than any heads and cam kit available.
Old 03-13-2003, 01:37 PM
  #3  
Launching!
Thread Starter
 
NO F-BDY BS's Avatar
 
Join Date: Nov 2002
Location: S'port
Posts: 207
Likes: 0
Received 0 Likes on 0 Posts

Default Re: My Goal: Run 10s with stock internals.

I have been looking at a few bolt on cars that are in the mid to high 11s with bolt ons. Ill have to drop about 150lbs to make up for the 100+lbs of cage ill have to install. From what I have seen with other cars it seems possiable. If anyone knows anyone else with a similiar setup any info would be greatly appreciated.
Old 03-13-2003, 01:43 PM
  #4  
Launching!
Thread Starter
 
NO F-BDY BS's Avatar
 
Join Date: Nov 2002
Location: S'port
Posts: 207
Likes: 0
Received 0 Likes on 0 Posts

Default Re: My Goal: Run 10s with stock internals.

I have been looking at a few bolt on cars that are in the mid to high 11s with bolt ons. Ill have to drop about 150lbs to make up for the 100+lbs of cage ill have to install. From what I have seen with other cars it seems possiable. If anyone knows anyone else with a similiar setup any info would be greatly appreciated.
Old 03-13-2003, 03:24 PM
  #5  
Staging Lane
 
Brandon98TA's Avatar
 
Join Date: Nov 2001
Location: Grapevine, TX / College Station, TX
Posts: 77
Likes: 0
Received 0 Likes on 0 Posts
Default Re: My Goal: Run 10s with stock internals.

It has been done. Go to the Texas Forum of Ls1.com and look for beenfetchedlately(Mike). He has an 01 A4 Formula with stock internals that ran 10s with nitrous and full boltons.




All times are GMT -5. The time now is 03:04 PM.