no spark and I have a new opti and coil and ICM
06-11-2006, 05:17 PM
#1
Teching In
Thread Starter
Join Date: Jan 2006
Location: st.charles
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
no spark and I have a new opti and coil and ICM I installed my new motor on my 97 z28 friday and put a new opti on it and went to fire it up yesterday and it didnt start I had a weak spark befor then i got no spark. So i bougt a new coil and ICM and still nothing i got another opti to today and still nothing all it does is crank and no spark. I checke all fuses there good grounds are good to i checked all the signals to the ICM and checks out good and to the coil and still no ******* spark. ( any ideas ) NO SES light
