Holden Performance - Do 2000 plus Holdens have Ls6 Intakes?
06-15-2006, 07:26 AM
Does any one know if this is so or do they have regular Ls1 intakes?
06-15-2006, 07:34 AM
i believe the only ls1 with LS6 intakes were all ls1 2001 and up, so i think thats a no it doesnt have one.
06-15-2006, 08:19 AM
Ok 2001 up then.
06-15-2006, 08:26 AM
You might want to try the
>>>Holden Performance Section<<< (http://www.ls1tech.com/forums/forumdisplay.php?f=29)
>>>International Members Section<<< (http://www.ls1tech.com/forums/forumdisplay.php?f=114)
06-15-2006, 08:27 AM
Check intake manifold casting number to know if it's LS1 or LS6 intake.
LS1 - 12560688 (97-00)
LS6 - 12561184 (01-04)
LS1 - 12556333 (97-00)
LS6 - 12561182/4 (01-04)
Holden LS1 Tonner
06-16-2006, 04:21 AM
I think the manifolds changed when the change from the VT to VX models was made .
below is a quote from Sid447
Engines that were stamped VF-01xxxxxx,
(i.e built 2001; .....the engine number is in front of the left-hand cyl head above the thermostat) I believe were the ones that not only got the LS6 intake but a considerable number also had the LS6 block.
Yours will no doubt be stamped VF-00xxxxxx
vBulletin® v3.7.4, Copyright ©2000-2013, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO