For Sale/Trade: extreme gaming / overclocking PC parts (cpu, psu, mobo, cases, etc)
06-23-2006, 11:10 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: Mar 2006
Location: houston, tx
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
For Sale/Trade: extreme gaming / overclocking PC parts (cpu, psu, mobo, cases, etc) PRICES ARE OBO, and may trade for ls1 parts listed at the bottom:
motherboard- ASUS p4p800se (nuff said) $70.00
http://store.yahoo.com/directron/p4p800.html
cpu- p4 3.0e $130.00 (yup e0 stepping)
http://directron.com/p43e.html
case- all aluminum beantech mid-tower igloo-1 (comes with a brand new lite-on lightscribe dvd-rw combo that has been permanantly stealthed) $85.00
http://www.beantech.com/products/alu...ses-igloo1.htm
http://compreviews.about.com/od/cddv...nSHM165H6S.htm
psu- enermax eg651p-ve fm psu (550w) (36a @ +12v single rail) 90.00 obo
this is excellent for running numerous raid-0 drives, and maintaining alot of room to o.c. the 3.0 prescott (good for presler/crossfire rigs too) i have sleeved the motherboard power wires w/ metal electrical conduit (looks good!)
http://www.newegg.com/Product/Produc...82E16817103437
cpu cooler- Noctua 120mm heatpipe (imported from U.K.) 70.00 this is the very best cooler you can use for maximum temps on air. this thing cools better than most water *kits* on the market.
http://www.driverheaven.net/reviews/noctua/index.htm
CUSTOM COOLER MASTER STACKER server case 100.00.... comes w/ crossflow motherboard fan, and various mods... the case is beautiful, and would make a good water cooled/ or phase change case! the side panel had a large porthole cut into it, and is still a little rough (needs finishing, or trim)
comes with Numerous MODDING supplies... including 50.00 worth of electrical conduit, and various other sleeving, and other supplies. this stuff will be thrown in with the coolermaster case.
http://www.directron.com/stct01uw.html
all the parts/hardware above are like brand new, and come with boxes/manual/and various peices that come new with said hardware. notthing has been in actual use... just mounted to mach up a case for various modding ideas.
everything is getting parted
*looking for the following parts:
ported ls6 pump
arp headbolt kit
clutch
poly motor/tranny mounts
decent condition lid (mine is cracked)
various interior pieces
im open to other stuff.
trey
pm w/ questions
motherboard- ASUS p4p800se (nuff said) $70.00
http://store.yahoo.com/directron/p4p800.html
cpu- p4 3.0e $130.00 (yup e0 stepping)
http://directron.com/p43e.html
case- all aluminum beantech mid-tower igloo-1 (comes with a brand new lite-on lightscribe dvd-rw combo that has been permanantly stealthed) $85.00
http://www.beantech.com/products/alu...ses-igloo1.htm
http://compreviews.about.com/od/cddv...nSHM165H6S.htm
psu- enermax eg651p-ve fm psu (550w) (36a @ +12v single rail) 90.00 obo
this is excellent for running numerous raid-0 drives, and maintaining alot of room to o.c. the 3.0 prescott (good for presler/crossfire rigs too) i have sleeved the motherboard power wires w/ metal electrical conduit (looks good!)
http://www.newegg.com/Product/Produc...82E16817103437
cpu cooler- Noctua 120mm heatpipe (imported from U.K.) 70.00 this is the very best cooler you can use for maximum temps on air. this thing cools better than most water *kits* on the market.
http://www.driverheaven.net/reviews/noctua/index.htm
CUSTOM COOLER MASTER STACKER server case 100.00.... comes w/ crossflow motherboard fan, and various mods... the case is beautiful, and would make a good water cooled/ or phase change case! the side panel had a large porthole cut into it, and is still a little rough (needs finishing, or trim)
comes with Numerous MODDING supplies... including 50.00 worth of electrical conduit, and various other sleeving, and other supplies. this stuff will be thrown in with the coolermaster case.
http://www.directron.com/stct01uw.html
all the parts/hardware above are like brand new, and come with boxes/manual/and various peices that come new with said hardware. notthing has been in actual use... just mounted to mach up a case for various modding ideas.
everything is getting parted
*looking for the following parts:
ported ls6 pump
arp headbolt kit
clutch
poly motor/tranny mounts
decent condition lid (mine is cracked)
various interior pieces
im open to other stuff.
trey
pm w/ questions
06-25-2006, 10:59 PM
#5
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: Mar 2006
Location: houston, tx
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
nope, was in the process of building a budget video encoding/decoding rig. but i decided to go all out, and went the .65nm route and got a presler rig built.
trey
trey
