Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Help with smoke in exhuast.

Thread Tools
 
Search this Thread
 
Old 06-25-2006, 06:40 PM
  #1  
10 Second Club
Thread Starter
iTrader: (22)
 
SPRAYED 01's Avatar
 
Join Date: Mar 2006
Location: Northwest side of Chicago
Posts: 3,677
Likes: 0
Received 2 Likes on 2 Posts

Default Help with smoke in exhuast.

Im getting some dark grey smoke from the tail pipe. Im pretty sure this started shortly after i installed my heads and intake. At first i thought it was running rich so i brought it to my tuner and he leaned her up at idle. It smells like oil and im about half quart low after 500 miles. I had to reuse the valve seals from my old heads but they only had 2k on them. If its smoking all the time not just at start up could it be the valve seals. No oil on any plugs either. I spray the car all the time, about 7 bottles in the last 2 months. Car still runs great and put down 430hp n/a, what could it be.
sorry for long thread.
Old 06-25-2006, 06:51 PM
  #2  
TECH Senior Member
iTrader: (4)
 
vettenuts's Avatar
 
Join Date: Jul 2004
Location: Little Rhody
Posts: 8,092
Likes: 0
Received 9 Likes on 9 Posts

Default

Did you use blue loctite or some other sealer on the rocker bolts on the intake side? The threads probably go through on ported LS6 heads.
Old 06-25-2006, 07:23 PM
  #3  
10 Second Club
Thread Starter
iTrader: (22)
 
SPRAYED 01's Avatar
 
Join Date: Mar 2006
Location: Northwest side of Chicago
Posts: 3,677
Likes: 0
Received 2 Likes on 2 Posts

Default

No i did not use loctite i put them on with nothing.
Old 06-25-2006, 09:59 PM
  #4  
Staging Lane
 
SunshinePerformance's Avatar
 
Join Date: Jul 2005
Location: Killeen Tx
Posts: 97
Likes: 0
Received 0 Likes on 0 Posts
Default

Hey man have the same problem , if you find out anything please pass it on.
Old 06-25-2006, 10:37 PM
  #5  
10 Second Club
Thread Starter
iTrader: (22)
 
SPRAYED 01's Avatar
 
Join Date: Mar 2006
Location: Northwest side of Chicago
Posts: 3,677
Likes: 0
Received 2 Likes on 2 Posts

Default

Well my next step is to put new valve seals in and apply some thread sealer to the rocker studs. Ill let you know how it goes.




All times are GMT -5. The time now is 03:51 PM.