Magic Stick MS4
#3
TECH Resident
iTrader: (1)
Join Date: Dec 2004
Location: Brookings, South Dakota
Posts: 927
Received 0 Likes
on
0 Posts
Originally Posted by brad8266
Site doesnt have it at 114, but I am sure they can do it for ya. Give them a call.
http://www.texas-speed.com/shop/item...d=175&catid=49
It shows it all the way up to 115 on this page. Part number CamPkg-2.
I just need to get off my lazy butt and call them.
R/
Frat
#5
TECH Resident
iTrader: (1)
Join Date: Dec 2004
Location: Brookings, South Dakota
Posts: 927
Received 0 Likes
on
0 Posts
Originally Posted by Fratsit
http://www.texas-speed.com/shop/item...d=175&catid=49
It shows it all the way up to 115 on this page. Part number CamPkg-2.
I just need to get off my lazy butt and call them.
R/
Frat
It shows it all the way up to 115 on this page. Part number CamPkg-2.
I just need to get off my lazy butt and call them.
R/
Frat
Finally got off my butt and called. Talked to Zack and ended up going with the Torquer V2 package, ported oil pump, and LS2 timing chain.
Cant wait to get her stabbed in.....
#6
TECH Apprentice
iTrader: (1)
Join Date: Mar 2005
Location: Houston
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Fratsit
Finally got off my butt and called. Talked to Zack and ended up going with the Torquer V2 package, ported oil pump, and LS2 timing chain.
Cant wait to get her stabbed in.....
Cant wait to get her stabbed in.....
#7
TECH Resident
iTrader: (1)
Join Date: Dec 2004
Location: Brookings, South Dakota
Posts: 927
Received 0 Likes
on
0 Posts
My Z is a 100% street car. I wanted something that would be fun to drive, but not be too obnoxious on the street.
I figured this would be a good starting point since it is my first cammed car. I thought long and hard between 5 different cams TSP offers and the Torquer V2 was the one that Zach and I collectlively agreed would be the best "off the shelf" choice for my current level of bolt-ons and how I use the car. I bought it with a 112 LSA.
Nothing against the MS4...that bumpstick is the ****.
R/
Frat
I figured this would be a good starting point since it is my first cammed car. I thought long and hard between 5 different cams TSP offers and the Torquer V2 was the one that Zach and I collectlively agreed would be the best "off the shelf" choice for my current level of bolt-ons and how I use the car. I bought it with a 112 LSA.
Nothing against the MS4...that bumpstick is the ****.
R/
Frat
Trending Topics
#9
TECH Senior Member
iTrader: (23)
Join Date: Aug 2005
Location: Watertown, NY
Posts: 8,797
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Fratsit
http://www.texas-speed.com/shop/item...d=175&catid=49
It shows it all the way up to 115 on this page. Part number CamPkg-2.
I just need to get off my lazy butt and call them.
R/
Frat
It shows it all the way up to 115 on this page. Part number CamPkg-2.
I just need to get off my lazy butt and call them.
R/
Frat
#10
TECH Resident
iTrader: (1)
Join Date: Dec 2004
Location: Brookings, South Dakota
Posts: 927
Received 0 Likes
on
0 Posts
Yeah....
We definately have to hunt around on there website. I do remember reading somewhere that TSP will not sell a customer a MS4 on a 110 without flycutting the pistons. I could be mistaken, though.
I dont believe they have the Torquer V.3 on there site yet, either.
Cant wait to get my Torquer V.2 package
R/
Frat
We definately have to hunt around on there website. I do remember reading somewhere that TSP will not sell a customer a MS4 on a 110 without flycutting the pistons. I could be mistaken, though.
I dont believe they have the Torquer V.3 on there site yet, either.
Cant wait to get my Torquer V.2 package
R/
Frat