Quiet Mufflers for the Street which work??
#1
TECH Fanatic
Thread Starter
iTrader: (14)
Join Date: Dec 2003
Location: Salisbury,MD
Posts: 1,729
Likes: 0
Received 0 Likes
on
0 Posts
Quiet Mufflers for the Street which work??
THIS CAR IS TOO DAMN LOUD, Ha. I want to be able to drive this thing on the street and am a little concerned about how loud it is at the moment and the first time I get pulled over my street days are probably done, ha. It honestly sounds like the 346 I had when I ran it with open headers and 11.6 to 1 or so compression, but I have mufflers on the new motor . They are Magnaflow 3.5" mufflers with the 14" long case. I was always under the understanding that the magnaflows were some of the quietest mufflers you can get which also work very well too.
Any suggestions on a quieter 3.5" muffler? I'd like it to work well like the magnaflows do too if possible as I will be racing with mufflers some of the time as certain racing events will require them i'm sure.
Also, keep in mind that I have very limited room for multiple mufflers or anything like that cause of my 3.5" pipes.
Thanks.
P.S. This is for my 434 11.5 to 1 pump gas solid roller c5r headed thing a mabob
Any suggestions on a quieter 3.5" muffler? I'd like it to work well like the magnaflows do too if possible as I will be racing with mufflers some of the time as certain racing events will require them i'm sure.
Also, keep in mind that I have very limited room for multiple mufflers or anything like that cause of my 3.5" pipes.
Thanks.
P.S. This is for my 434 11.5 to 1 pump gas solid roller c5r headed thing a mabob
#2
TECH Fanatic
Thread Starter
iTrader: (14)
Join Date: Dec 2003
Location: Salisbury,MD
Posts: 1,729
Likes: 0
Received 0 Likes
on
0 Posts
http://speedtalk.com/forum/viewtopic.php?p=28485#28485
What do you think about my idea of 3" after the magnaflows with bullets?
What do you think about my idea of 3" after the magnaflows with bullets?
#3
Launching!
iTrader: (4)
Join Date: Dec 2002
Location: southern ohio
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
I have dual 3in Magnaflows on an X-pipe and it is really quiet for what it is. Or at least I think so. It is quieter than my hooker cat back was. Are your magnaflows straight through? Meaning enter the center and exit at the center. Mine are offset which forces the exhaust to make a couple of turns in the muffler. Even though the turns are slight in the muffler, I think that is what keeps it from being so loud.
Just read the other thread you have linked. Mine might be quiet from the X as well. Not really sure now.
Just read the other thread you have linked. Mine might be quiet from the X as well. Not really sure now.
#6
7 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Gainesville, Florida # of drag strips runs: ?!?!?
Posts: 8,834
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by 2002blackZ
I have dual 3in Magnaflows on an X-pipe and it is really quiet for what it is. Or at least I think so. It is quieter than my hooker cat back was. Are your magnaflows straight through? Meaning enter the center and exit at the center. Mine are offset which forces the exhaust to make a couple of turns in the muffler. Even though the turns are slight in the muffler, I think that is what keeps it from being so loud.
Just read the other thread you have linked. Mine might be quiet from the X as well. Not really sure now.
Just read the other thread you have linked. Mine might be quiet from the X as well. Not really sure now.
Derek
Trending Topics
#9
TECH Fanatic
Thread Starter
iTrader: (14)
Join Date: Dec 2003
Location: Salisbury,MD
Posts: 1,729
Likes: 0
Received 0 Likes
on
0 Posts
They are the 3.5" oval ones and are completely straight through! This is no cam only car, this is a border line race motor. Like I said, when I had my 346 with a big cam and 11.6ish to 1 compression with open headers, it was about like this 434 c5r headed 11.5 to 1 motor is with mufflers
I think i've got a few ideas now of how to quiet her down but keep the opinions rollin!!!
I think i've got a few ideas now of how to quiet her down but keep the opinions rollin!!!
#10
TECH Fanatic
Thread Starter
iTrader: (14)
Join Date: Dec 2003
Location: Salisbury,MD
Posts: 1,729
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Slow Z28
the magnaflows. buddy's 540 BBC in his mustang rolling around, sometimes makes you wonder if the car is even on. and the car is mid 9's n/a, so it's no slouch of a BBC.
#12
TECH Fanatic
Thread Starter
iTrader: (14)
Join Date: Dec 2003
Location: Salisbury,MD
Posts: 1,729
Likes: 0
Received 0 Likes
on
0 Posts
Ok, been brain storming with a buddy here in the office. Think we're going to construct some of Vizard's terminator boxes and run some 2.5" dynomax/walker untral flow mufflers. That should quiet it down and according to vizard's "theory" will result in a no loss system!
If anyone is interested in the 14" long 5 x 8 case 3.5" magnaflows I have now feel free to pm me. they have all of 5 minutes run time on them at idle, no driving.
If anyone is interested in the 14" long 5 x 8 case 3.5" magnaflows I have now feel free to pm me. they have all of 5 minutes run time on them at idle, no driving.
#14
TECH Fanatic
Thread Starter
iTrader: (14)
Join Date: Dec 2003
Location: Salisbury,MD
Posts: 1,729
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Slow Z28
I'm almost positive, i put a call into him though just to make 100% sure
#16
TECH Junkie
iTrader: (19)
Haha, no i mean "quiet". It's quiter then my car was with the spiral flo's and an x-pipe. Then again, we have two YS trimmed SBF's cruising along with him to our hang out, ones at 750RWHP and the other is being broken in, but did 1200 fwhp, haha. So THOSE are the loud cars
He called back and said that those were the ones.
you are talking about these on yours right?
http://store.summitracing.com/partde...5&autoview=sku
he has something more along these...
http://store.summitracing.com/partde...5&autoview=sku
He called back and said that those were the ones.
you are talking about these on yours right?
http://store.summitracing.com/partde...5&autoview=sku
he has something more along these...
http://store.summitracing.com/partde...5&autoview=sku
#17
TECH Fanatic
Thread Starter
iTrader: (14)
Join Date: Dec 2003
Location: Salisbury,MD
Posts: 1,729
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Slow Z28
Haha, no i mean "quiet". It's quiter then my car was with the spiral flo's and an x-pipe. Then again, we have two YS trimmed SBF's cruising along with him to our hang out, ones at 750RWHP and the other is being broken in, but did 1200 fwhp, haha. So THOSE are the loud cars
He called back and said that those were the ones.
you are talking about these on yours right?
http://store.summitracing.com/partde...5&autoview=sku
he has something more along these...
http://store.summitracing.com/partde...5&autoview=sku
He called back and said that those were the ones.
you are talking about these on yours right?
http://store.summitracing.com/partde...5&autoview=sku
he has something more along these...
http://store.summitracing.com/partde...5&autoview=sku
#19
LS1Tech Co-Founder
iTrader: (34)
I have been running dual 3" Magnaflows with an X pipe. Sounds mean but not crazy loud.
Honestly if you want quiet I would run dual electric cutouts and a muffler from a Cadillac... Y pipe into single muffler.
Honestly if you want quiet I would run dual electric cutouts and a muffler from a Cadillac... Y pipe into single muffler.