WTB: WS6 (98-02) Front end body parts for conversion
07-21-2006, 09:20 AM
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Mar 2004
Location: Atlanta, GA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
WTB: WS6 (98-02) Front end body parts for conversion I'm looking to convert my 94 Trans Am front parts to WS6 style front parts. So I need the fenders, bumper, supports, headlight assemblies, etc. But, I do not need the hood, I already have a hood.
My friend did the entire conversion with hood for $800 so I'm looking to spend less than that if possible. The body parts do not have to be pristine, as its going to be painted anyway.
I'm located in central Florida. But I will soon be traveling from here to NC (through Atlanta, etc) for vacation so I could likely pick stuff up on the way if you are located in the path.
My friend did the entire conversion with hood for $800 so I'm looking to spend less than that if possible. The body parts do not have to be pristine, as its going to be painted anyway.
I'm located in central Florida. But I will soon be traveling from here to NC (through Atlanta, etc) for vacation so I could likely pick stuff up on the way if you are located in the path.
07-21-2006, 05:23 PM
#2
good luck getting it for under 800, i spent around 900 for mine and that was NOT including hood (500), i was able to get the headlights, and hood off of here, but the supports and stuff like that you are going to have a hard time finding, there are a lot of people parting out cars though, so ask around, if nothing else you can go here, http://www.trademotion.com/partlocat...=5&catalogid=2
to get all of the brackets/supports, that is what i did.
to get all of the brackets/supports, that is what i did.
