Anyone seen this type airbox before?
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Jun 2006
Location: Punxsutawney, PA
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Anyone seen this type airbox before?
New to the forum have had fbodys all my life off and on. Got my latest a 98 Formula with aftermarket ramair hood and airbox. The box is so close to the throttle body the bellows is almost completly pinched off. I thought I could solve this with a smooth bellows but to close for that. Anyone have any suggestions or help? Car runs very strong can't wait to get some air to it.
Last edited by joinpa; 03-23-2008 at 02:22 PM.
#3
Teching In
Thread Starter
iTrader: (1)
Join Date: Jun 2006
Location: Punxsutawney, PA
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
have it off now, just not sure what to replace it with. Not sure if I'll have to replace the whole deal with something like a K&N Kit. the way the hood fits I wonder about clearance.
#5
Teching In
Thread Starter
iTrader: (1)
Join Date: Jun 2006
Location: Punxsutawney, PA
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Certianly think it's aftermarket looked all over it and the airbox for a name but no luck. I'll checkout their website. Saw one similar to mine for sale on here sounds like it might be for an LT1. I'd go back to a stock ram airbox if someone has one reasonable.
#7
Teching In
Thread Starter
iTrader: (1)
Join Date: Jun 2006
Location: Punxsutawney, PA
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Ok it's fiberglasss. i went to the suncoast website your right that looks like it. no pictures of the underside of the hood but the airbox is the same. When I connect the MAF to the airbox I only have about an inch between throttle body and MAF. need very short tube.