View Full Version : Need help on WEIGHT REDUCTION!!


Danny
01-01-2003, 07:53 PM
I have a 98 Z28 M6. I want to take off as much weight as possible but i don't want to gut the car. I like my interior. So far this is what i have done:

Spare & jack
AC compessor
wiper reserve
upper/lower control arms
K member
carbon fiber DS
headers
13lb flywheel
AC condensor
removed cats
DS loop
24lb battery in rear

How much would the SS hood & Bear brake system save me? What other things am I missing? Any comments will be greatly appreciated. Thanks <img border="0" alt="[driving]" title="" src="graemlins/gr_driving3.gif" />

2FAST4U
01-01-2003, 08:15 PM
I think the SS hood it heaver at 51#. I trashed the air bags and the stock wheel. Stock seats! Take out the rear seats. And trash the Monsoon/amp.

Colonel
01-02-2003, 02:21 AM
Do a search for my weight reduction thread. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

Colonel
01-02-2003, 02:30 AM
BTW, that thread is located in the Drag Racing section.

94bird
01-04-2003, 10:47 PM
Colonel,

I took out my cruise control module and cable from under the hood and weighed it during my Christmas break. It's 4 lbs. I don't think you had a weight for that on your list.

BTW, for a '94 Firebird with power leather seats I weighed my stock seats:

Driver's 49 lbs.
Pass. 43 lbs.
Rear including belts 42 lbs.

Sold them to a 3rd gen owner and am replacing them with Corbeau Clubmans at 13.5 lbs. each not including mounts, which I am told weigh 5 lbs. each. That's about 100 lbs. off the car and less than $100 expense to me since I sold my stock seats.

M3EATER
01-07-2003, 11:11 PM
These will save you some weight....

Aluminum LCAs & PHB

Gordon
www.provenperformanceconcepts.com (http://www.provenperformanceconcepts.com)

<img src="http://www.provenperformanceconcepts.com/PPC%20BANNER%20468x60.jpg" alt=" - " />
<img src="http://www.provenperformanceconcepts.com/ControlArmDetail%20MED.jpg" alt=" - " />
<img src="http://www.provenperformanceconcepts.com/PanhardDetail%20MED.jpg" alt=" - " />