G5x4 and gtp heads?
07-28-2006, 08:07 PM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2005
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
G5x4 and gtp heads? I have a set of stage 2 GTP heads milled 30 thousants,with 2.02 ,1.60 valves.Can I fly cut the pistons and make it work a g5x4 or if not what cam? I have a yank pe 4200 and 373 gears.
