98 ASR switch, SS hood black
07-31-2006, 04:23 AM
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Oct 2005
Location: Sunny San Diego, CA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
98 ASR switch, SS hood black I'm looking for an ASR switch (not burnt out light) to replace a burnt out one. Also in the market for a black SS hood, paypal ready direct deposit (no fees). Email georgewa@hotmail.com. Thanks for your time.......
07-31-2006, 10:46 AM
#2
Teching In
Thread Starter
iTrader: (3)
Join Date: Oct 2005
Location: Sunny San Diego, CA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
BTW, would anyone happen to know why the light on my ASR switch quit working after I installed a new stereo. Could it be from turning the car ignition on without the switch being hooked up and blowing the circuit somehow? I briefly turned the car on to verify the stereo was hooked up correctly. I'm hoping that the light itself. All of the fuses appear to be in good condition. I metered the purple/white wire as to my understanding is the wire for the light on the switch. There is no power there, but I'm thinking it could be a ground curcuit that is opened and closed. I noticed two other wires are live with 12v. Thanks for your time.....
08-08-2006, 01:45 AM
#4
Teching In
Thread Starter
iTrader: (3)
Join Date: Oct 2005
Location: Sunny San Diego, CA
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Anyone have any ideas on this? I have installed the SLP ASR module that forces the car to start with ASR off, but it is not working. Haven't got around to getting another switch yet, but I'm thinking something else has gone wrong. Whatever run the module, which I'm assuming is what make the light come on, is not working correctly. BTW, stillremains, if you see this please verify that your new switch's light worked. Or have you not got it yet? Thanks everyone........