View Full Version : Custom build going over sea's pics.


Scott@DrivelineSolutions
08-10-2006, 10:23 PM
We just finished this build up for a customer that is over sea's. It is a Moser through bolted aluminum center section with a 1350 billet yoke, 3.89 Pro gear, 40 spline Spool, 40 spline gun drilled and start flanged axles with Wilwood drag brakes. This assembly is good for well over 1500 hp and is very light compared to the other assemblies we have built. Enjoy the pics,


http://i35.photobucket.com/albums/d186/1BAD86Z/Dragraceaxle006.jpg

http://i35.photobucket.com/albums/d186/1BAD86Z/Dragraceaxle007.jpg

http://i35.photobucket.com/albums/d186/1BAD86Z/Dragraceaxle005.jpg

SPEEDYws6
08-10-2006, 10:42 PM
mmmmm, very nice I sure would like to upgrade to that setup, but I put too many street miles on my car. Maybe just the gun drilled 40's , spool, and brakes for me. Oh well, one of these days.

Alec Alvarez
08-11-2006, 02:27 AM
Very nice indeed.

SS4Matt
08-11-2006, 05:33 PM
:hail: looks pretty nice scott! i hope you didn't carry that thing all the way downstairs for those shots :jest:

Revelation Z28
08-11-2006, 09:15 PM
:drool:

Scott@DrivelineSolutions
08-13-2006, 11:38 PM
:hail: looks pretty nice scott! i hope you didn't carry that thing all the way downstairs for those shots :jest:


LOL, this build is so lite I picked it up myself and set in on the pallet so I could get it out tomorrow. I'm gonna duplicate the same build for my Z over the winter but I'm gonna reuse my 35 spline axles since I already have them with 5/8 studs installed.

Scott @ DLS


P.S. The housing is so narrow that the ends are welded right into the control arm brackets.

Ari G
08-13-2006, 11:42 PM
Is this going to Iceland?

fastlt1
08-14-2006, 12:18 AM
LOL, this build is so lite I picked it up myself and set in on the pallet so I could get it out tomorrow. I'm gonna duplicate the same build for my Z over the winter but I'm gonna reuse my 35 spline axles since I already have them with 5/8 studs installed.

Scott @ DLS


P.S. The housing is so narrow that the ends are welded right into the control arm brackets.


How much has it been narrowed on each side?

oange ss
08-14-2006, 10:34 AM
do you guys drop ship rears from Moser or do you look over them before shipping to customers ?

Scott@DrivelineSolutions
08-15-2006, 07:36 AM
How much has it been narrowed on each side?


This assembly is 2.75" narrower per side and it was ordered for a 3rd gen. The housing ends are welded right into the lower control arm brackets and Moser said this is the narrowest they could make it.

Scott@DrivelineSolutions
08-15-2006, 07:39 AM
do you guys drop ship rears from Moser or do you look over them before shipping to customers ?


I assemble all of the center sections myself, Moser just supplies me with their housing and axle package. I use Strange components in my builds since Moser's iron castings are soft.

SSwanner
08-15-2006, 07:39 PM
how much weight do you really save by gun drilling and star flanging? thats about the only light weight option i didn't opt for and i kinda regret it now :(

Scott@DrivelineSolutions
08-16-2006, 12:48 PM
how much weight do you really save by gun drilling and star flanging? thats about the only light weight option i didn't opt for and i kinda regret it now :(


I would have to say they shaved off 5 lbs. per axleshaft. The hole diameter was 7/8 and the axle was drilled right to where the bearing was machined at. Moser recomends not to drill axles if the vehicle is a street driven.

2001z
08-16-2006, 04:46 PM
That looks like one sick setup scott :)

Nittany_marine
08-16-2006, 11:04 PM
Looks awesome as always Scott. I wouldnt expect anything less from ya. I hope all is well up in Michigan! :)

Scott@DrivelineSolutions
08-17-2006, 12:07 AM
That looks like one sick setup scott :)

Yours is mostly done, just waiting for weld on BMR swaybar brackets to come in.

Scott@DrivelineSolutions
08-17-2006, 12:11 AM
Looks awesome as always Scott. I wouldnt expect anything less from ya. I hope all is well up in Michigan! :)


How is everything Jim? Looks like your car is running good these days! Mine is just about ready to break into the 8's and best pass was a few weeks ago at 9.11 @ 153 in the heat with about 4200 ft corrected.

SSilverSSurfer
08-17-2006, 12:47 AM
damn thats a monster,

Nittany_marine
08-17-2006, 10:03 AM
How is everything Jim? Looks like your car is running good these days! Mine is just about ready to break into the 8's and best pass was a few weeks ago at 9.11 @ 153 in the heat with about 4200 ft corrected.

Holy..... :eek2: All is good down here. I gave the car a 6Krpm launch, and a few ~4Krpm launches at the track on some Micket E/T's, and then drove her home without even a peep coming from the rear. :)

2001z
08-17-2006, 02:59 PM
Holy..... :eek2: All is good down here. I gave the car a 6Krpm launch, and a few ~4Krpm launches at the track on some Micket E/T's, and then drove her home without even a peep coming from the rear. :)
That is everyones response to the rears scott builds :judge: that is the main reason i called him to build me one :) Man how do those gears do on the street ?

SS4Matt
08-17-2006, 06:27 PM
Mine is just about ready to break into the 8's and best pass was a few weeks ago at 9.11 @ 153 in the heat with about 4200 ft corrected.

looks like it's time to update the numbers in your sig scott :judge: :) :eek2:

Scott@DrivelineSolutions
08-17-2006, 09:39 PM
looks like it's time to update the numbers in your sig scott :judge: :) :eek2:


LOL, thanks for the reminder.

the predator
08-20-2006, 05:33 PM
damn, that rear looks real good! :thumb: