Non-Automotive Classifieds - WTB or FS Cisco Networking equipment

I have a bunch of Cisco equipment laying around, all of it is tested and good working order. I have almost any series of the switchs(2900,3500...ect).

Also im always looking to upgrade my current setup, so if anyone has old or used equpiment they want to get rid of let me know.

Email is 91sbcamaro@gmail.com Or PM me.

Thanks,
Brandon

What kind of pricing are you looking for?

Depends on the equipment, i used to do alot of cisco purchases and sales. Let me know what equipment you have and ill give you a price im looking for on them.

Thanks,
Brandon

you got anything for broadband routing?

you got anything for broadband routing?

you got a PM

Well, here is the deal. I am studying for my CCNA and I am kind of looking for something to practice with. I have priced kits specifically for this. If you have anything that would help, let me know. Thanks

For the CCNA you're going to want 3 routers at a minimum - 4 will give you the best results. 2500's will work fine for this, just make sure you get serial cables to match the connection. If you can get 2600s even better.

It wouldn't hurt to have a 2950 series switch as well, preferably 2. It will help you prepare for the layer 2 side of the house.


Not sure where its heavy now on the test, but when I took it, it was heavy into OSPF for the routing side(minimal IS-IS questions, EIGRP was the next on the list under OSPF). It was also heavy into VLANs, switching protocols such as STP, VTP, and the like.

Sorry to hijack.....

Well, here is the deal. I am studying for my CCNA and I am kind of looking for something to practice with. I have priced kits specifically for this. If you have anything that would help, let me know. Thanks

The minimum you will need is 2-2500s and a switch at least a 2900. you dont want a 1900 because its menu based. Ive studied CCNA using these, I then later got a couple other switches and routers.

Ive got 2 2501s laying around, they are perfect for what you need. Ill give those to you at 50$ a piece. And for a switch, if your not picky i can probally get you a 2900 or 3500 with 1 or 2 bad ports and sell it to you super cheap. Everything will work on it except the bad port.

Let me know if your intrested and ill go look for a switch at my work

Ok i got a 2924-XL-EN its got ports 13-16 & 22 bad, as in they wont pass any traffic. With this said ill sell it super cheap for say 75$. All units will come with a power cord and console cable.

What IOS are they running?

What IOS are they running?

On the 2500s i can load up any IOS up to 12.3-12a

On the 2900s i can load up anything up to c2900xl-c3h2s-mz.120-5.WC14.bin

Ill have to see what kind of memory and flash the 2500s have on them right now or else ill have to order some more to make it 16/16(i think thats whats needed to run a 12.3 &12.2)

What all cables come with them? I am very interested

What all cables come with them? I am very interested


I have power cables and console cables, Ill also throw in some Ethernet cables i dont have any serial cables or else i would throw those in also.

So 125.00 shipped for all 3 pieces with the latest IOS on each?

So 125.00 shipped for all 3 pieces with the latest IOS on each?


You gots a PM!!!