Going to buy a 226/226 need some help
08-30-2006, 07:31 PM
#1
Teching In
Thread Starter
Join Date: Jan 2005
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Going to buy a 226/226 need some help going to go in my 2004 M6 GTO.
Cam is 226/226 @ .05 585/585 112lsa. This is patriots cam. I have tried to search it and havent found too many results. I am also going to go with their spring package but what push rods do i need to buy? And are there any other things i would need to purchase (gaskets???) etc Thanks for any help
Cam is 226/226 @ .05 585/585 112lsa. This is patriots cam. I have tried to search it and havent found too many results. I am also going to go with their spring package but what push rods do i need to buy? And are there any other things i would need to purchase (gaskets???) etc Thanks for any help
08-30-2006, 07:35 PM
#2
TECH Regular
iTrader: (1)
Join Date: Apr 2006
Location: albany ny
Posts: 480
Likes: 0
Received 0 Likes
on
0 Posts
I bought a Scoggins Dickey LS1 Cam gasket kit for my cam swap, comp 918 springs should suffice, and if your heads are untouched you'll need 7.400 inch push rods, have fun with your build and please post dyno #s when you're done.