can i use stock pushrod length?
09-21-2006, 09:44 PM
#2
Originally Posted by mvvette97
I'm thinking about using the TR224 cam. Firt of all do i have to get differant pushrods or can I use my stock? Also is the stock length fine for this cam?
09-22-2006, 03:44 AM
#4
9 Second Club
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
You will be fine with that cam on a stock pushrod lenght. I ran TR224 on a 114 and it ran fine. Reason was I was sent the wrong pushrods when I ordered and didnt notice till I was going together with it. I would highly reconmend getting hardened pushrods and dont forget the springs. Comp 918's are fine for that cam.
09-22-2006, 03:48 AM
#5
Originally Posted by JMBLOWNWS6
You will be fine with that cam on a stock pushrod lenght. I ran TR224 on a 114 and it ran fine. Reason was I was sent the wrong pushrods when I ordered and didnt notice till I was going together with it. I would highly reconmend getting hardened pushrods and dont forget the springs. Comp 918's are fine for that cam.