99WS7

iTrader: (13)

Maybe not a lot of DD but still driviing it quite a bit. Im thinking it will be to big for me so thats why Im playing with the TRAK. Any thoughts on this?

35th SS

iTrader: (2)

not I.strictly once a week car.use to beat on it every weekend when our track was still open.trak is a good choice too.good luck.

orangeapeel

iTrader: (18)

I would have to say if you are going to drive it more often than not you are gonna want to make sure that you have every supporting mod for a cam that is gonna want to drag you all over the place. I would check into the TRak cam honestly.

99WS7

iTrader: (13)

thanks for the replys. Looks the like the Trak will get me where I want to be anyay. I would like to sit a 415 cam only. I have QTP long tubes, off road kooks and a slp billet so I have a good exhaust. It sounds very damn good with my G5X1 but I want to got bigger. I will also be throwing on a 90/90 set up along with what ever cam I use, and a 85 mas with a ASP underdrive so Im hoping for a pretty big pwr increase.

SPLATT

iTrader: (1)

bah a little out, But i have seen some bad *** results with a TR230 reverse split. Granted, its a small cam compared to the previously mentioned. but check up on it. very nice idle as well

sprayjunkie

The tune is gonna be the determining factor in how daily driveable the car is. My buddies C5 with that cam gets driven EVERY day w/ AFR 205 (445rwhp) and idles like a champ at 800-850rpms.
IMO its one sick idle as well.

RoastEmSS

DD here with the T2, drives like stock

chris93266

iTrader: (5)

what is a t2?

SLP4CamaroSS

iTrader: (16)

torquer 2 from tsp

jamesSS

^^^^ what are the specs on that cam, if you dont mind me asking?

RoastEmSS

232/234 .595 .598 112

hammertime

iTrader: (1)

Just curious what you are looking to get out of your cam swap? It doesn't look like you are making much of a change...except for the intake lift

G5X1 - 228/232, .588/.574, 112 or 114
Trak - 231/234, .640/.590, 112

Also, is the X1 also ground 4 degrees advanced? If the Trak cam isn't ,you're moving your IVC back and losing dynamic compression.

ablakez28

iTrader: (9)

i dd mine have been for 2 years. besides not so great gas mileage its fine. makes 431.7/390 stock heads and ls6 manifold i would deffinatley go for it. but make sure you drive one first

LS1IMPULSE

iTrader: (42)

Yup i got one too, you will eait like it or hate it, I dont really care for mine since I mostly street driving and that cam is geared mostly for the track with the high reving yo will need to do to pull the power out of it

monicaz28

iTrader: (5)

My boyfriend's car is a TRex, all bolt ons car that is driven pretty much every day, and we live about 25 minutes from where he works. I think it runs and drives great, the only thing I could even complain about is the 3 speed in it.

chris93266

iTrader: (5)

Really? your boyfriend drives a trex? That's bad ***!!!!! where can i get one? haha just messin with ya

import slayer

I DD mine and I have no compaints

Randy WS6

iTrader: (69)

I DD mine too, Love it, M6 car ans 4:30 gears ,on open road cant tell it from stock cam ,except when passing cars ,you better hold on The most complement i get on my car is the way it sound , bad ***.

tjswanson2001

iTrader: (1)

I don't have the TRex cam, but my TSP 233/239 can be a D.D. no problem, but you need a good tune. Before tuning there was NO way I would want to even drive the thing on the street, but after the tune, the car runs great and idles around 850. And yes, be prepared to have everyone tell you your car sounds bad ***!

CrawlinWS6

iTrader: (41)

I drove my t-rex, fast 90/90 thru a A4 with a 4000 stall. Driving with the stall was a bigger pita then the cam!