Head Gasket
#1
11 Second Club
Thread Starter
Join Date: May 2004
Location: Troy,MI.
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
Head Gasket
I am looking to raise my CR a little with a thin head gasket .04/.045 . Does anybody but Cometic make these? Fel-Pro has one but it is for a 4.xxxx bore. Will this be ok to use on a stock 3.9 bore engine? Any body got part no. for the right gasket?
Thanks
Thanks
Last edited by YankeeVert.; 10-04-2006 at 08:13 PM. Reason: spelling
#2
TECH Regular
iTrader: (18)
Join Date: Jun 2006
Location: Houston, TX
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
I just received my .040 gaskets (they make them down to a .030) made by cometic. I purchased them from Texas-Speed.com part #SDL391040 standard 3.910 bore. I wouldn't recommend running an over size bore head gasket.
I was running the GM performance gasket which is .051.
Best wishes,
J.R.
I was running the GM performance gasket which is .051.
Best wishes,
J.R.
#3
11 Second Club
Thread Starter
Join Date: May 2004
Location: Troy,MI.
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1stz06
I just received my .040 gaskets (they make them down to a .030) made by cometic. I purchased them from Texas-Speed.com part #SDL391040 standard 3.910 bore. I wouldn't recommend running an over size bore head gasket.
I was running the GM performance gasket which is .051.
Best wishes,
J.R.
I was running the GM performance gasket which is .051.
Best wishes,
J.R.
#4
11 Second Club
Thread Starter
Join Date: May 2004
Location: Troy,MI.
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1stz06
I just received my .040 gaskets (they make them down to a .030) made by cometic. I purchased them from Texas-Speed.com part #SDL391040 standard 3.910 bore. I wouldn't recommend running an over size bore head gasket.
I was running the GM performance gasket which is .051.
Best wishes,
J.R.
I was running the GM performance gasket which is .051.
Best wishes,
J.R.