WTB LS1/T56 Pullout!!!
#5
i have a t56 came outa of my 00 ss ls1 i sold the motor couple of days ago and the trans is in working condition no problems shifting or anything it comes with:
spec stage 3 clutch
cross member
alumm drive shaft
bal housing
pro 5.0 shifter
leather hurst shift ****
peddals
slave cylinder and all the lines for it
i am sure there is couple mor elil things i will add for the swap bc i am parting out the car so i dont need other small parts
looking to get $1500 for everything please pm me if interested and we can figure out the best price
spec stage 3 clutch
cross member
alumm drive shaft
bal housing
pro 5.0 shifter
leather hurst shift ****
peddals
slave cylinder and all the lines for it
i am sure there is couple mor elil things i will add for the swap bc i am parting out the car so i dont need other small parts
looking to get $1500 for everything please pm me if interested and we can figure out the best price
#7
11 Second Club
iTrader: (74)
Join Date: Sep 2005
Location: Nicholasville, KY
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
LS1/T56 19k from 02 WS6 241 Heads/LS6 Block
Engine and Trans $5500 or prices below if seperate.
LS1 from 02 WS6 with 19k on it. (Have Vin and Carfax from the Car)
Following parts are installed and runs great)
Complete with accessories(No Ac)
ASP Underdrive Pulley
TR224/224 Cam .563/.563 Lift
Comp 918 Springs
Titanium Retainers
Comp Hardened Pushrods
LS6 INtake
Ported Throttle Body
PCM Speed Density Tuned for the Cam(Vats/Smog Deleted)
$3800.00
T56 Trans with 19k Miles
Z06 Clutch
Bellhousing
Flywheel
Hydraulics
Pro-5.0 Shifter
4thGen Pedals Modded for 3rd gen
$1800.00
Howell LS1 Harness Integrated with 92 RS Harness. $600
Make it an even $6k for complete engine, trans, and howell stand alone harness. Located in Nicholasville, KY 40356. Can drive the car before i pull it all.
Engine and Trans $5500 or prices below if seperate.
LS1 from 02 WS6 with 19k on it. (Have Vin and Carfax from the Car)
Following parts are installed and runs great)
Complete with accessories(No Ac)
ASP Underdrive Pulley
TR224/224 Cam .563/.563 Lift
Comp 918 Springs
Titanium Retainers
Comp Hardened Pushrods
LS6 INtake
Ported Throttle Body
PCM Speed Density Tuned for the Cam(Vats/Smog Deleted)
$3800.00
T56 Trans with 19k Miles
Z06 Clutch
Bellhousing
Flywheel
Hydraulics
Pro-5.0 Shifter
4thGen Pedals Modded for 3rd gen
$1800.00
Howell LS1 Harness Integrated with 92 RS Harness. $600
Make it an even $6k for complete engine, trans, and howell stand alone harness. Located in Nicholasville, KY 40356. Can drive the car before i pull it all.
Trending Topics
#8
TECH Apprentice
iTrader: (15)
Join Date: Nov 2004
Location: St.Louis
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
I have a motor. 100,000 miles
If you would have seen my post you could have gotten the whole "pull out" but i had more people asking for parts individually so i parted the tranny from the engine and the ls6 intake from the motor.
I do have all of the other accessories + motor for $1800
If you would have seen my post you could have gotten the whole "pull out" but i had more people asking for parts individually so i parted the tranny from the engine and the ls6 intake from the motor.
I do have all of the other accessories + motor for $1800
#10
i am located in Il chicago shaumburg area still have the trans just took it out few days ago
so if anyone interested pm me becuase i dont come back here on the threads very foten so please pm if interested
good day
so if anyone interested pm me becuase i dont come back here on the threads very foten so please pm if interested
good day
#12
Have an ASA LS1 with howell harness and computer. 400+ bulletproof rear wheel hp and built by lingenfelter. They were 14000 new 5000 for package.
Contact Peter at Cozzolino Motorsports 317-626-2222 cell if interested.
Contact Peter at Cozzolino Motorsports 317-626-2222 cell if interested.