View Full Version : reputable machine shop in so cal area


98turbls1
10-23-2006, 07:28 PM
I'm going to be throwing in some forged rods and pistons soon to accomidate the procharger install...I'm wanting to get my block machine and clearenced so that everything is better than new...I'm wanting to get a deck hone to 3.905, a line bore, crank polished, block completely cleaned, and whatever else that would be needed....I'll be doing the assembly after that but just wanted some advice from someone that has had good luck with a shop....Thanks

musclebird69
10-23-2006, 08:20 PM
ttt. i too am interested in a reputable machine shop in the so cal area. i wanna get my block honed and prepped for my forged 347. c'mon guys, let's hear some suggestions.

dyls1
10-23-2006, 08:24 PM
I have had great luck with Burbank Speed, but with sbc stuff. Also Eddings in San Fernando has done a few sbc type things for me and I would recommend either one. Good guys to deal with all around.

Steve - Race Eng
10-23-2006, 09:28 PM
Call John Rader in Chula Vista. 619-420-2233

I work with John on special projects. He can do what you are looking to have done and do it correctly.

Steve



I'm going to be throwing in some forged rods and pistons soon to accomidate the procharger install...I'm wanting to get my block machine and clearenced so that everything is better than new...I'm wanting to get a deck hone to 3.905, a line bore, crank polished, block completely cleaned, and whatever else that would be needed....I'll be doing the assembly after that but just wanted some advice from someone that has had good luck with a shop....Thanks

98turbls1
10-23-2006, 09:56 PM
Call John Rader in Chula Vista. 619-420-2233

I work with John on special projects. He can do what you are looking to have done and do it correctly.

Steve

I'll give him a call tomorrow...Thanks for the input.... Where exactly are you located in Oceanside?? I live in Vista and may have to come by for a chat... =)

SP Motorsports
10-23-2006, 10:21 PM
burbank engine (818)201-5312 ask for kenard

52172
11-14-2006, 08:51 PM
Is this who does your motors Rob or do you do them yourself for your customers?

Ryne @ CMS
11-15-2006, 01:55 AM
burbank engine (818)201-5312 ask for kenard
they did a great job on my old lt1 :jest: :eyes: