Country Boy

iTrader: (24)

What are yall using and how do you like it. I had a Hooker CB with my turbo setup and felt it was too restrictive. I dropped the muffler and I gained a ton by the SOTP feel. Itll light them up through 3rd and I gained about 2lbs of boost, but now it sounds worse than ***. I mean it sounds worse than my LM ever did. Its worse than those redenck trucks with straight pipes Its embarassing I cant use a traditional muff because of my modified gas tank.

What takes care of this rasp? I was looking at the Classic Chambered muffs https://ls1tech.com/forums/generation-iii-external-engine/583963-exclusive-classic-chambered-powerpacks-not-powersticks-pics-videos-dyno-inside.html but heard not to run a chambered muffler..

pwrtrip75

iTrader: (8)

single exhaust 3 1/2" first a bullet and then a dynomax race oval dumps before the axle. Its straight through all the way and quiet. The running 2 inline really helped, and flow wasnt compromised at all.
Video in my sig of how it sounds.

2002/Black/SS

iTrader: (3)

i say put a bullet muffler, then cutout then ur hooker catback, ull get really good quiet sound with the cutout closed, and with it open the bullet muffler will make it sound alittle better

Country Boy

iTrader: (24)

I cant run a CB anymore...

FormulaFire

iTrader: (20)

no Muffler..

longrange4u

iTrader: (2)

Muffler? Oh that is the turbo right?

Country Boy

iTrader: (24)

I dont have a muffler now and it sounds like complete **** It has more rasp than the LM with H/C..

~JOSHUA

iTrader: (92)

Try running a Sweet Thunder inline, or how about two single chamber Flowmasters run inline? All you really need is some sort of can or pipe to act like a musical instrument (kinda)... better than now.

I'm still running my SLP DD and it's so freakin' quiet, I'm about to cut it off too.

smoke20

iTrader: (2)

im running a dynomax bullet right before exhaust tips and it took out the rasp and made it deep and doesnt seem to have cost any power or boost loss. its a straight through bullet no twists.

2000 Tran Zam

iTrader: (2)

Im running a magna flow exhaust (4inch inlet/outlet).

trans2000am

iTrader: (49)

any body got pics of their setup?

FormulaFire

iTrader: (20)

Do you have a vid? I'd like to hear it. I run a dumped downpipe and it sounds like music... It's not loud because the turbo absorbs a lot of it. Quiter than my N20 ls1.. Real good clean sound!

Country Boy

iTrader: (24)

nah, no vid. I cant steer

Smearin

I have a borla xr ... but its located under the passenger side after the dp

ggk

iTrader: (1)

try a loudmouth. the muffler is before the axle so it may work for you.

ninetres

iTrader: (35)

I am running a 3.5" borla xr-1 right beside my driveshaft. It is still rather loud with my lopey cam, but definitly sounds bad ***.

My buddy Tondss said it looks like a ricer muffler and I am still in love with my prelude (previous car)

raymond mckinney

iTrader: (4)

I can always film anytime u know that!

at100plus

iTrader: (1)

I had just an SLP LM from the Y pipe back and loved the sound (although it was sometimes annoying on long highway runs). I just put American Racing headers on with cats and Y and now I hate the raspy sound, it sounds like a NASCAR now when before it had a nice tight tone. It's almost unbearable on the highway now. I'm curious to see what you go with. I'm looking into the Magnaflow.

Pro Stock John

iTrader: (34)

4.00 Dynomax bullet dumped right before rearend. I just bought another muffler instead since it's not the sound I am looking for.

NA$TY-TA

iTrader: (21)

4" Bullet here also... dumped before the rear end.....