Scrapiron

Where is the best place "cheapest" to get a LS-6 intake manifold

MjMaro

iTrader: (11)

Parts for sale section used ones for $300-$350

Scrapiron

Why would anyone want to sell one? I thought they were the best one to have.

orangeapeel

iTrader: (18)

People are buying the FAST intakes.

cws T/A

iTrader: (3)

I bought one in the forsale section 350 shipped in like new condition .I bought 2 2001 front coolant tubes 68 .

Scrapiron

I thought the ls6 intake was better am I wrong?

cws T/A

iTrader: (3)

Fast intake is an aftermarket piece around $800 + $ 450 90 MM TB

Its better to a point all engine its better , more cfm , forced induction like the Ls6 . fast has strength issues under higher psi . Dont know if anyones tried the burst panels maybe that would help .

HAMRHEAD

iTrader: (8)

There's no benefit going from an LS6 to a FAST 78mm but there is to a 90MM. Of course then you need the 90mm TB. So cost will be a factor in whether or not people use the LS6 over the FAST. If you plan on a nice H/C setup and maybe some N2O then look at a 90mm FAST intake instead if the money is there. The ls6 performs well too. Look in the used or check out Speed inc for a good price.

brad8266

iTrader: (23)

i bought an LS6 on here for 150

Bandit28

iTrader: (28)

ask for more than that bro

cws T/A

iTrader: (3)

http://www.tpis.com/plog/index.php?o...Id=20&blogId=1

http://rds.yahoo.com/_ylt=A0geuvJD9k...=14%26blogId=1

SS125

iTrader: (1)

I wonder how the power would be with the 90mm modified LS6 manifold with the NW 90 mm throttle body?

JKDZ28

iTrader: (14)

I picked mine up locally - brand new for $300.

SS125

iTrader: (1)

What kind of power did you realize?

cws T/A

iTrader: (3)

another 1997-2000Ls1 vs 2001+ Ls6 Intake
http://www.ls1howto.com/content/dyno...ds_cam_car.jpg

allngn_c5

iTrader: (3)

I'll be selling my 78 mm FAST in a few months. (March / April) Make me an offer. Once I have my 90/90 combo I'll let it go for a fair price. PM me if you are interested and save my email addy for future contacts. March, or April 2007. Forged 402 cometh, maybe. 90/90 on the 346 for sure. Later

camaro_best

here 145$ from vette 2004

kackley

iTrader: (4)

how u tell the difference from a ls1 intake and a ls6 ?...i have always wondered that ...the look the same to me

Hell'sChariot

iTrader: (24)

The ls6 will be flat on the bottom. Where the ls1 will have a ridge.

Cerebrex

iTrader: (20)

Here's the bottom of an LS6. This is for sale for $325 shipped.