Reasonable price on a used(500m) T70
10-30-2006, 06:30 PM
#1
Banned
Thread Starter
iTrader: (1)
Join Date: Jan 2006
Location: Everywhere
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
Reasonable price on a used(500m) T70 Its a masterpower T-70** with a .68 exhaust...it has 500 miles on it. Do you think 450 is a reasonable offer for this turbo or is it worth more?..also..where could I get a .96 A/R housing for this turbo if I were to buy it.
Last edited by TransAm6383; 10-30-2006 at 07:40 PM.
10-30-2006, 08:49 PM
#3
I paid $525 I believe in the spring for mine... offer $450 and see what he says... $500 wouldn't be a bad deal though.
From my own personal expierience, you can use a Garret exhaust housing on MP turbos, but you cannot use MP housings on Garrett turbos...
From my own personal expierience, you can use a Garret exhaust housing on MP turbos, but you cannot use MP housings on Garrett turbos...
10-31-2006, 02:10 PM
#4
Originally Posted by HydroStream6
From my own personal expierience, you can use a Garret exhaust housing on MP turbos, but you cannot use MP housings on Garrett turbos...
10-31-2006, 03:38 PM
#6
TECH Apprentice
iTrader: (6)
Join Date: Nov 2003
Location: Bastrop , TEXAS
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
I never had a problem running any exhaust housing on a MP turbo (just had to make sure it was a P-trim housing) but I guess if they had problems .......
Either way $450 is a good price. You can check turbomustangs.com and ebay for exhaust housings (found one for my old set-up for $50 shipped on ebay). I would ask why the guy is selling it and try and make sure it's in good shape before any money changes hands.
Good luck!!
Either way $450 is a good price. You can check turbomustangs.com and ebay for exhaust housings (found one for my old set-up for $50 shipped on ebay). I would ask why the guy is selling it and try and make sure it's in good shape before any money changes hands.
Good luck!!
Trending Topics
10-31-2006, 07:57 PM
#9
TECH Resident
iTrader: (4)
Join Date: May 2002
Location: Jacksonville NC
Posts: 783
Likes: 0
Received 0 Likes
on
0 Posts
I'm running a MPT70 w/ .96housing - worked great. I'm switching to 6.0 manifolds from stock ones.
Contact Jose at ForcedInductions he can get the housing you need.
Contact Jose at ForcedInductions he can get the housing you need.
10-31-2006, 08:49 PM
#10
Banned
Thread Starter
iTrader: (1)
Join Date: Jan 2006
Location: Everywhere
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by HydroStream6
Correct... you'll most likely want an on-center with v-band exit.
