MTI Stealth II in an '02+ LS6
#1
Teching In
Thread Starter
Join Date: Jul 2005
Location: Europe
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
MTI Stealth II in an '02+ LS6
Has anyone installed the MTI Stealth II camshaft in an ´02+ Ls6 ? I was looking for a cam that would put me at about 420 rwhp in conjunction with major bolt-ons but without having to touch the heads. At the same time I want something that will not lope or give me a rough idle.
In an older post I read that it would be worthwhile for an ´01 Ls6, but be a waste of time
on an ´02+ LS6 since they already have a bigger cam.
How much could I gain with that cam ?
Also, I´d appreciate it if anyone knows a better cam that could achieve what I’m looking for.
Thanks
Alex
In an older post I read that it would be worthwhile for an ´01 Ls6, but be a waste of time
on an ´02+ LS6 since they already have a bigger cam.
How much could I gain with that cam ?
Also, I´d appreciate it if anyone knows a better cam that could achieve what I’m looking for.
Thanks
Alex
#5
TECH Resident
iTrader: (6)
Join Date: Jul 2004
Location: West Palm Beach fl usa
Posts: 934
Received 0 Likes
on
0 Posts
But the one that help me to decide to jump on this path is there:
https://ls1tech.com/forums/dynamometer-results-comparisons/101464-mti-stealth-ii-cam-stage-ii-ls6-heads-makes-422-7-rwhp.html
Christian
https://ls1tech.com/forums/dynamometer-results-comparisons/101464-mti-stealth-ii-cam-stage-ii-ls6-heads-makes-422-7-rwhp.html
Christian