3/8 stud rockers acceptable for Comp 503
11-06-2006, 12:59 PM
#1
Staging Lane
Thread Starter
iTrader: (3)
Join Date: Apr 2005
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
3/8 stud rockers acceptable for Comp 503 As stated in the title, would non self-aligning 3/8 stud rockers be adequate for the Comp 503 cam? I may be able to snag a good deal on a used set... However, I don't want to take any risks, if they won't hold up, I'll just stick with the 7/16 ones. Any feedback is welcome. Thanks.
11-07-2006, 02:43 PM
#4
TECH Resident
iTrader: (8)
Join Date: Jul 2004
Location: Raleigh, NC
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by foggedz
They should be fine as long as they are good ARPs.
11-07-2006, 05:04 PM
#6
TECH Resident
iTrader: (8)
Join Date: Jul 2004
Location: Raleigh, NC
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by always faster
The self align rockers 1.6 are good up to .600" lift.After that you ll need some non self align and guide plates 
