what h/c for the 4.8
11-08-2006, 03:22 AM
#1
Teching In
Thread Starter
Join Date: Nov 2005
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
what h/c for the 4.8 i have a ls1 cnc ported heads and a cam228/230 .571/.573 112
can i swap them to my 4.8 truck or this cam
''XFI'' 260 Hydraulic Roller Cams
GM C/K Trucks 99-06 4.8/5.3L
Lift: .513''/.520''
Duration @ .050'':206°/212°
RPM Range: 800-5800
Lobe Separation: 115
can i swap them to my 4.8 truck or this cam
''XFI'' 260 Hydraulic Roller Cams
GM C/K Trucks 99-06 4.8/5.3L
Lift: .513''/.520''
Duration @ .050'':206°/212°
RPM Range: 800-5800
Lobe Separation: 115
Last edited by viper2fast; 11-08-2006 at 03:29 AM.
11-14-2006, 07:45 PM
#4
10 Second Club
iTrader: (14)
Join Date: Jul 2005
Location: Indy
Posts: 2,520
Likes: 0
Received 0 Likes
on
0 Posts
the second cam you put down up there is pretty much close to a stock LS1s camshaft.
only heads that are excluded from your list would be LS7 and L92 heads. ported LS6 heads are probably all you need. personaly id go with a bigger cam, unless you have to deal with a daily driver.. but even then id run a bigger one..
only heads that are excluded from your list would be LS7 and L92 heads. ported LS6 heads are probably all you need. personaly id go with a bigger cam, unless you have to deal with a daily driver.. but even then id run a bigger one..