Western Members - Ls2 short block for sale

ls2 short block for sale, its out of a 05 gto, pistons already notched .080" 2.125" intake notch, 1.60 exhaust valve notch.. motor has about 39,000 miles on it, runs very strong, doesnt burn a drop of oil, asking $1000 firm, local pickup perfered, motor will be out of the car by saturday evening. let me know pm me, or call (951)375-0515

t t t

Why are you selling the LS2 outa the GTO?

i have my reasons :devil:

I just thought you were gonna work on putting the vette together first...
Quick question ryne... Do you know how/have the tools to be able to extract a small piece of a bolt thats stopping me from putting my camaro back on the road? If so would you be willing to help me?

^ Sorry didn't mean to hijack your fs thread...

I have someone that may be interested in it... I'ma give him your number and have him call you

back :offtopic:, john, you still havent gotten that out? get a center punch that's approx the same size as the hole to punch the bolt in the middle, and drill it with a 1/8 bit, then 1/4" then 3/8" then 7/16" then use an EZ-out on it, by hand, using a tap holder with BOTH hands working it back and forth. use good bits so you dont break any in the crank, and use lots of WD-40. if theres still any sticking out, you can have a friend weld a bolt to it and just back it out.

back :offtopic:, john, you still havent gotten that out? get a center punch that's approx the same size as the hole to punch the bolt in the middle, and drill it with a 1/8 bit, then 1/4" then 3/8" then 7/16" then use an EZ-out on it, by hand, using a tap holder with BOTH hands working it back and forth. use good bits so you dont break any in the crank, and use lots of WD-40. if theres still any sticking out, you can have a friend weld a bolt to it and just back it out.

Thanks Olly! I know how, and you clarified what i was thinking...
I just don't have the drill/bits. John said he would let me borrow them, but over the past couple months he's been to busy to let me... :confused:

I just thought you were gonna work on putting the vette together first...
Quick question ryne... Do you know how/have the tools to be able to extract a small piece of a bolt thats stopping me from putting my camaro back on the road? If so would you be willing to help me?
hit it with a center punch, then drill to the specified size, then use the proper size ez-out, which bolt is it.

still for sale

Thanks Olly! I know how, and you clarified what i was thinking...
I just don't have the drill/bits. John said he would let me borrow them, but over the past couple months he's been to busy to let me... :confused:


sorry i actually work

sorry i actually work

Dude, dont take it the wrong way. I'm not mad. I was just wondering if anyone else might have the tools i could borrow. I just really miss my poor car. If you have some time where you could bring it to me, or i could pick it up then that doesn't take to much of your time. I appreciate everything that you have already done.

Ryne its the bolt that goes through the balancer hub into to the crankshaft :(

http://i94.photobucket.com/albums/l114/nemanracing/crankbolt3.jpg

Ryne, would you be willing to take payments??? I may be interested in it...

dont take offense to this, but i dont know you, so payments would be out of the question

you would need 1 nut up front as a down payment :jest:

dont take offense to this, but i dont know you, so payments would be out of the question

john, i have a shitload of bits here, check and see if you need something. i have various punches too. hell, ill loan you my fists if you need em haha.

Hello do you still have this motor for sale and is there anyway you would ship it to Nebraska if I pay for shipping. My zip code is 68873 if you could find out or tell me how to find out on shipping cost. Also are you putting a stroker in there is the shortblock all good. Thanks James

sold!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

sorry it is sold