AFR 8019 springs on a stock ls6 head?
#1
Teching In
Thread Starter
iTrader: (6)
Join Date: Jun 2006
Location: Spivey Kansas
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
AFR 8019 springs on a stock ls6 head?
Will AFR 8019 springs fit on a stock ls6 head? I have 2 AFR 225 heads I was going to use and 1 is near stock and the other was milled .080 or .090. The compression ratio gets raised to much for my procharger by milling the other head .080 or so thousands. So I am stuck with buying another AFR 1630 and selling the one that is milled or just putting the 243 heads back on. Just who would buy a single milled head anyway? Thanks Ken